Separate names with a comma.
PM SENT
Question, if the right lifter galley is tubed & #1 main is blocked off, how does #1 main get oil? I had a used 414 engine that had been tubed &...
New Manley rods, full groove mains, shift @ 6500, 7100 thru the traps. used non syn Valvoline 10W30 for break in. Switch to Royal Purple Syn 10W30...
75PSI cold , 65PSI hot at idle, 70PSI at the stripe. 10W30 oil Valvoline race, Royal Purple 10/30 after break in. The Race block has the bigger...
I have a 360 Stock Eliminator engine. It has now spun #6 rod bearing twice. Once in a stock 360 block & now again in a MP race block. Two...
Sold it Saturday evening.
INDY 440-1 PORTED ALUMINUM HEADS. PORTED BY MODERN CYLINDER HEAD. FLOW 375 CFM INT / 297 CFM EX WITHOUT A PIPE, WITH PIPE 315 CFM. NEW ROLLER...
I got depressed looking for a good 360 block core for my Stocker. Went through 4 blocks, none would clean up @ .060. Rust was the problem. So I...
It came up on my FB feed. Mopar W7 -8-9 Motors
looks like Dart is going to be making new blocks for the small block MoPar engine. That's great news!
I have a JW ultra bell & Hughes 8" convertor for a power glide if interested. convertor is setup for a 500" motor. 700.00 for both.
Looking for a virgin pair 308 casting heads. They will have 1.88 int valves & 1.60 exh valves. Open chambered. Came on 1988-91 TBI 360 truck...
340 cast low compression aftermarket pistons.
I have always been able to come up with suitable engine blocks any given time. Went through 5 360 blocks recently trying to find one that would...
LOOKING FOR A SINGLE KB243 .060 PISTON FOR A 340. USED OR NEW. SINGLE OR SET, PM ME WITH WHAT YOU HAVE.
Well, sort of. My son's wife runs a SST S10 pick up, Her dad has a SG Old Calais, SG Chevette & S/C Chev dragster. They have their roots in...
Vernon Roland, he is my son's father inlaw. Out of Blanchard, Ok.
Nothing at this time, putting a aluminum headed 360 in it, It will run 7.0's.
I recently sold my back half '67 Barracuda to help fund my new engine for the Stocker. My Son's Farther-in-law offered up his first Bracket car to...
Filled block = Race only.
any paper work would be great. bought this block from a guy in texas on classracer.com. I'm using it for a stocker engine.
Bought a MoPar 360 2 bolt main race R block. The lifter valley doesn't have the usual return drain holes. Any one modify these for drain back?...
Guys & Gals, take care when storing any bare metal parts before rust gets to them. In the last two weeks, I have been searching for a 360 block...
Dodge pick truck dipstick & tube is what you need. Order it for a 318 or the 360.
PM sent
18.00 ups frt
LIKE NEW 1050CFM / 4150 TYPE GAS QUICK FUEL CARB. WORKS GREAT! ASKING 500.00.[ATTACH] [ATTACH] [ATTACH]
HOLLEY 950HP ALCOHOL CARB. LIST - 80498-1[ATTACH] [ATTACH] I BOUGHT THIS NEW, USED IT FOR TWO SEASONS, WORKS GREAT! ASKING 500.00
