Separate names with a comma.
Might i suggest you use Tamiya primers. That's what I use and have had great success. As for your wheels you might look at shape ways....
How are the Headlight trim rings?
Has the list been updated at all?
64 Plymouth Valiant, running a 69 318 with the early cover and pump.
I'm in the process of reassembling my 318 and was wondering if there was a guide that showed bolt diameter and length for accessory...
Might check with Layson restorations
I have a set that I just took off. I've never sold anything on here and I'm not sure what such a thing would be worth. Should mention they are off...
Hey Charlie:I wish I did have a BBP rear end. So i have another question, can the BBP drums be used once a get these axles re-drilled?
Do you just have a machine shop drill them for you?If I go to something else wouldn't it involve a lot of change?
It's a 318, running 40 over KB piston, 256 Comp cam and 714 heads that have 1.88, 1.6 valves. The bowls were opened up and smoothed out for better...
Thanks for the info, sounds like I have some issues to work out. Might be interest in your's but don't need 5.13 rears. I'm building...
Hey Guys:I have some questions about the 7-1/4 rear ends. First do they make axles in BBP for them? Second what all would i need to convert...
Hey Ken:Couple of questions, How do the areas around the water pump holes look (that's where mine is damaged)? Second How much to ship to 72118?...
Crap!!! which I would have seen this sooner I just ordered a front end kit a couple of weeks ago.Jon
What shape are the shift cables in for the push button?
How are the cables for the pushbutton trans? is it a \6 or V8?
I wee you took a pic of the heater cables, what i was referring to were the push button trans cables. It looks like it might have been a push...
Are the pushbutton cables still there?Jon
Sorry for the delay was doing some research and it looks like both the /6 and V8 took the same cables, so with that what kind of shape...
I have a question, are you parting out this car and if so are the cables for the push button is good condition?Jon
Sorry to say but looks like I'm out, While getting the block ready to hone today found a crack so going to have to use the money on a replacement...
Well looks like I need to do something. I'm closer so I will do the same deal. I am curious why you are selling? Do you take PayPal?Jon
So how old is the unit approx?
Can you tell me more about the 6A? I'm assuming it is used, how long? No problems?Jon
That's a sharp looking ride, wish i had those wheels on mine.Jon
Hey guys:I finally got the motor out and was able to get some better measurements. It looks the heads measure out at 63 cc and i have 16 cc in...
What duster is this?