Separate names with a comma.
I feel the torque converter is key. Did it seem to stall higher with the 2.76?
Cant help you with the TQ fitment, but make sure the LD4B will seal to the larger heads ports. Wow, just noticed original date on this deal, hope...
I guess you're gonna narrow it?
Any chance your vacuum advance isn't working?And appreciate the discussion/explanation of how this carb works!
Anyone know the mfg. of the steering gear? Ever see it on any other cars?
I've had the same experience. I don't know if its cause these people don't put many miles on their cars or what. Is it a point of pride to brag...
Sounds like you figured it out, congratulations! The reason you had so much trouble bleeding the whole system before was because you hadn't bled...
You know I'm not sure but I think they help hold the intake gaskets in alignment so they don't shift on installation without sealant
Yes, D truck, B van used the long extension OD box thru 1986 I think.
I'd have the axles and drums drilled for the new bolt pattern. If you use screw in studs it'll leave more metal around the holes, and be stronger....
Many years ago our snap-on rep strongly discouraged the techs from marking their stuff. His story was that the mfg. would refurbish returned tools...
I drove a 440 Challenger with 24-1, and 20-1, boxes. If it was my daily driver I'd go with the 20-1. I counted lock to lock with both boxes and...
Good luck with your choice! I ran them on a '72 Challenger and they did start to break the spot welds on the crossmember. And this was NOT used to...
Thanks everyone, food for thought. it'll be a little while before I get this hooked up but I'll follow up with a report. Very interesting gm links...
I've got a '69 Jeep with a V-6 engine. Its got a Prestolite distributor with points. I'd like to use this to trigger the Mopar box. Hoping it will...
In NC 35 years or older, no inspection of any kind! I'm assuming if you're pulled over, or in a wreck the officer can give you an inspection!
Hope it works out for you. What year is the Dart? Hopefully any engine available that year would be OK for you to swap in.
So i didn't understand your original post, thought by "aftermarket" you meant non OEM. But now I think you must have a race car, and want an...
Yes, plug and play! now I did have to remove one wire that shared the old plug, but was easy to install in the new plug. Not sure why Chrysler...
I bought one from Evans, for underhood on my '72 Challenger. The one that handled ignition, oil pressure and water temp, A/C, washer motor, brake...
I've "saved" many holes by running the same size tap deeper in the hole and using a longer, full-thread bolt. The last one was two broken bolts on...
Well I tried swapping plugs first, cause it was the easiest thing to do, and Bingo, that's what it was! I didn't realize the timing light wouldn't...
The HEI choice, makes me wonder how tight it'll get up there. Looks like I may have to move a fuel line, not sure what else. I haven't even...
Thanks for the link! I notice nobody likes the prestolite! So maybe a Delco is in my future.
Many thanks for helping me think through this! I'll report back what happens. The replacement cap matched the fit and post spacing of the one I...
Ok, not a Mopar at birth, but many of us aren't either:)! My wife inherited a '69 CJ5 with a V6. I got the engine unstuck, after 30 years of...
I agree with a big IF! IF original dipstick, dipstick tube, and oil pan and or windage tray, are all being used TOGETHER only! If not, I'd put no...
With the blue paint showing, and the partial VIN, looks like its out of a late production '71 car.
optionb.org offers support. Glad you're reaching out to the forum. No two ways about it, it sucks!
Sorry, I just remembered his was their AAR spoiler, completely hollow.
