Separate names with a comma.
The windshield wipe motor had been stopping after running for a while. Bad news in a heavy rainstorm as I found out!!! Wasn't sure if it was a...
6.1 Hemi in my ‘69 Barracuda. https://www.hemmings.com/stories/article/modernized-mopar-1969-plymouth-barracuda
a bit more progress
Started applying acoustic mats to the firewall. Kind of hard on this almost 77 year old body!!!!
Not only sad, but frustrating!!! Must have been made from reprocessed plastic garbage!!
I bought some repro plastic bushings for the linkages in case the originals were worn. As soon as I snapped then together, they broke!! Junk!!...
D91= Sure Grip
019 = 8.75" Axle assembly
That black seal is a piece of dum dum caulk and is in the gasket kit. You cannot disassemble the pivot (well, not really true - anything can be...
Now starting on the interior. First up is refurbishing the windshield wiper pivots. Glass bead blasted and then drilled and tapped holes (1/4-28)...
Finally finished cleaning up all the wiring under the hood. Long process to run one wire at a time and then do a final test to ensure everything...
This should help
Idler pulley is washer, shield, lockwasher, nut
[ATTACH] [ATTACH] [ATTACH]
Lookin good. If you want to get really picky and detailed, the spark plug wire separators were on the engine when it was painted. Same for the...
Installed the engine temporarily so I can get all the Sniper wiring cut to the right length. [ATTACH]
Another good idea and I have that exact same bottle with my electrical supplies to use on any aluminum wire connections!
Finally got back at it!! Your strap idea worked great!!! The cable is attached to the battery lead post with a S/S bolt, washers and nut. I think...
We are good here as well. We had really low Covid numbers here. Only10 cases from Jan to Oct. however Nov was a different story. We ended Nov with...
Hello Wayne Hope all is well with you and your family. jim
Ha ha! Got sidetracked with another project. Then a car buddy brought over a Q Jet carb for an overhaul from his ‘70 GTO 400. I like your idea of...
Spent a bit of time gutting an old reproduction green top battery so I could install a new Odyssey battery inside. Still have to connect cables...
Great info and excellent restoration!!! Yes the V2 compressor is smaller displacement.
You are welcome!! Glad I could help a bit.
You will need an installation kit like this one 810BUK-KIT Mopar 1968-70 A,B,C-body Bucket Seat Headrest Mounting KitA few photos from...
I had a lot of work done on the cluster:
Install solid state voltage limiter $83.00
Calibrate all gauges $60.00
Convert amp gauge to voltmeter...
Idid the same thing and had them make a 3/8 line
I sent my cluster to Redline Gauge Works for restoration and the ammeter conversion to a voltmeter. http://redlinegaugeworks.com/
I've had overheated connections at the firewall connectors and at the headlight switch on 2 Cuda's. Other Mopar owners have had the same thing,...
I'm making a few non-original modifications. The first is adding headlight relays (and fuses). They are all under the battery tray. The headlight...
Made a little progress on the engine compartment,
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]