Separate names with a comma.
It all boils down to What you want your car to be, A race car or a street car. Do you want everything to fit in the factory wheel openings or are...
Info on the small blocks all engine sizes, just read down the chart. A-Engine
interesting about deciding I want to run a 275mm tire...The suspension dictates the tire. You are going to build the car to that tires capability...
The car definitely has that off road look...
Catalog Catalog Gallery: Vying For Voltage With A Mopar 110-Amp One-Wire Alternator - Mopar Connection Magazine | A comprehensive daily resource...
Reinstall the original relay to see if the relay is faulty. Just takes a few minutes. Electrical diagnostics. Battery fully charged ? All...
Did you check that you get power to the solenoid/relay and/or coil when you turn the key to the start position ?
Kind of doing it in reverse order. You need to make your mods first. Obviously you will not be using the stock brakes front or rear so the bolt...
So you are saying that nothing happens when you turn the ignition key but the starter will engage when you jump the solenoid in the fender ? Have...
At stock ride height, depending on the brand of tire, it may rub up front on turns.
Your front tires are close to stock size so 28-32 psi. The rear slightly lower since most load is on the front axle. The absolute proper way would...
If these are still in the truck, can you see the dash vin?
You just need to look at the casting numbers on the driver side where the starter is located. It has the size 318, 340, 360, ... Identification...
A torsion bar is not just a metal rod. It is a torsion spring and surface damage can lead to stress failures. Protect the surfaces even if you...
You are also going to need a high energy ignition system to keep the fire going under pressure. Might consider a platinum plug. Might try...
Chrysler Electronic Ignition If you read thru the article it tells you that the ecu must have a good ground. ANY electrical system MUST have a...
Click on the file attachment on post #17. That will answer your questions about the proper distributor phasing. the slot lines up with the front...
https://www.amazon.com/dp/B000CIZZGY/?tag=fabo03-20
Home Click on home link. Bruce ns1aar is a member here that does them. Excellent work, 25 + years doing them.
Year/make/model ? Try Bruce @ ns1aar He is a member here.
The person posting never said if he had disc or drum. The factory disc was a 4 1/2" pattern. The drum was 4". I have posted the charts for tire...
The Factory Service Manual shows the largest stock size to be an E70-14 on a 5 1/2" rim. w/sway bar and H.D. suspension.So with a factory rim a...
Mopar Engine Paint Color Guide 1960-1974 - MyMopar.com
Since we can't see what was done, all guesses here. I would take it out and tear it back down. Always easier the second time. They are not as...
You only get more compression at the loss of rebound length. Only changing the compression/rebound length ratio not total travel. Likes standing...
A good point, why are you replacing it. Corrosion ? If so the others are next to need replacing. If this is something that yourely on, a short cut...
:welcome: aboard. Love that Dart.
Anything was possible " back in the day ". Everybody knew someone or heard about odd things back then... Just mention something different and...
Slotted screws are generally used in wood working only. Phillips head in metal working applications.[ATTACH]
Happy Holiday's !! 2021 is almost here. Thank you for your business last year and Please keep your families safe. MoparLeo's Parts