Separate names with a comma.
That's an amazing difference from OEM.
Actually, her birthday was a week before mine. My gift wasn't nearly as cool as hers.On top of the vid, she got me a Gearwrench digital torque...
KISS at MSG on their Destroyer tour. Summer of '77
Hey Mark, Thanks for remembering!https://www.cameo.com/v/5fe22beee3aedf001d6d5516?utm_campaign=video_share_to_copy
Installed the s/s springs on both the Dart and Coronet. Add a pair of Bilstein shocks and a pinion snubber and you're good to go. And crank down...
I can't say how much was taken off. I kept grinding a little at a time until the distributor dropped. Probably a sheet of paper thickness...
I had the same issue on my 440 with the Pertronix. I ground down the corner a bit and it's been fine for 5+ years.
I'm going with the 800 AVS2 on the Coronet.
To be fair, it starts right up when cold and runs great. Ditching the POS FCC for an intank pump solved a lot of the initial issues. If I stop...
I installed a FiTech FI unit on the Coronet during the resto. Been struggling with the system going on five years now. This winter I'm going...
I have the pull handle on the Dart too, but I've never had it apart so I don't know what it looks like. But if your rear brakes and e-brake cable...
Possibly the e-brake return spring. My Coronet has the foot operated e-brake and I broke the ratcheting spring during the resto. Found a...
Might want to roll up that window first.
Nice. I need to buy a couple for Kern. :poke:
Rebuilt my first alternator (more like refurbished). Took it apart and cleaned up the copper connectors and replaced the brushes. Cost $11, half...
Devin has rebuilt a couple of dimmer switches for me - I highly recommend him.
My handheld died and FiTech discontinued the gen 2.0 version, now have a "new and improved" version for $200. Does anyone have a known-good...
Incredible work and attention to detail, as always. Love the 63-64 Darts.
I doubt you have a 1450 carb; that's essentially a race carb. The underlined W is the Weber logo, found on Edelbrock carbs - should look like...
I second 67 gt. If you're not up for it, moving over to efi is a bear. I did it on my Coronet, been running FiTech for 3 1/2 years. The terms...
Installed new dash pad from Dante's. While the dash was apart I painted the gauge needles and cleaned all the dash knobs. Until now I thought...
The pinstripe tape lays down nice. Great idea.
Really nice job! Got me motivated to work on mine.
Great attention to detail. I need to paint the grill on my Dart too. What material is the yellow?
That's why I took the one pic. The Dart hasn't had a hood to radiator seal or hood to cowl seal since I owned it. Just ordered the pair this...
No need. The factory shroud and fan have worked fine so far.
I knew going in that the mounting holes might be off a little. The 755 is for a post 1969 Dart. My 68 now has a 360 motor that wasn't available...
That I don't know.
Sprung a pinhole leak in the original radiator and even though the Dart doesn't haven't overheating issues, this was the time to replace with an...
Which model radiator did you wind up using?
