Separate names with a comma.
Yeah I just moved here from Sandy Eggo and this place, is, well, different.
Collierville TN anyone around here
After almost a year with the 200 4r transmission in my car it is time now for a change. I have been trying to find a great balance between power,...
Just wanted to write this here so everybody can see it at once. I worked as an engineer at Crower and now I work for Comp Cams here in Memphis as...
But you swallow
I live in Collierville TN and thanks. Yeah It is great working with people that understand what I am talking about. Also Billy Godbold's office is...
Well I have news that I no longer work for Crower and I have moved out of California to Tennessee. I work as an engineer for a new company Comp...
Shane, thanks for reaching out. What I am looking for is a hydraulic roller cam for my 408 Magnum based stroker. I looked on your website, but...
Well I could post the conversation that we had here. And for a Dr....I am not impressed either.
I am currently running a 212/208 on a 110LSA and is sounds...OK I guess. I am going more for mileage over power.
I have been facing my own problems with a faster engine. I almost just want to go back to a 12 second car and just have fun again......for once.
I like the pic you have.
We also made a video here at Crower.[MEDIA]
I will tell my wife that....thanks. But atleast my birth control is just my glasses filter on my phone where yours.....is.....well.......you. HA...
This is a great little cam with bitchen sound and power. The Tight LSA will help with lower compression. Back when all I would get was junk yard...
I work for Crower and design these cams. That part number 31240 is a great cam. I am working on getting the same time but in a 108LSA and 110LSA....
That would be my best guess at it and I do this for a living.....Spring pressure too high.
What spring pressure did you use when breaking it in........That looks like the spring pressure was not dropped or reduced when the cam was...
Mad Scientist GarageThat is his page. He has been busy so the video has not come out yet.
Well I do the final check out on these cams so I can name them whatever I like. But thank you.
Well it has been awhile since I have done anything in fact I don't believe I have even updated the Alternator upgrade..So here it is...."It...
Here is a write up I did when I was designing my own cam for my slant six in 2018. I took a few stock cams and ran them through the cam doctor....
I believe that is the one I got. It is a 8 quart with filter pan.
Cut down the bracket and sand blasted it. Going to put this on this weekend with the new alt.[ATTACH][ATTACH]
Ok shopping for a new oil pan that is a rear sump.......any info on this pan would help, Kevco part #M322........Good the bad and ugly. Thanks....
Dart19666 and the email is Shane@crower.com
The old K-member is out and the new one will be going in this week.[ATTACH][ATTACH][ATTACH]
The wifes car "Creamy Beaver" that radiator finally gave up the ghost and just died. It made it over 50 years and just could not be fixed so I...
I am going to upgrade the alternator soon and I wanted to make it a single groove so I cut it down.[ATTACH][ATTACH][ATTACH]
I have a mileage up date now that everything is good and broken in. My average is 23.7 mpg and that is over a 3 month-ish time span and driving...
