Separate names with a comma.
You can buy them from AMD but they are simple to make up. Last ones I installed I ended up making some because the holes in the AMD ones were off.
I had a pair of TA heads J/O.
The Z is rather uncommon. I have heard of them but never actually seen one before.
I have two of these. Not sure which side they are. PN 3514356
Its the 71 style with stainless ring.[ATTACH][ATTACH]
Be sure to get the right ones. They came in coarse thread and fine thread. Yours are the fine thread.
Al, I think thats what he already has.
2951861 C body 383 / 400 / 440 70-732899876 B&C body 400 / 440 1972...from Galen's casting # book.
The powered by ford valve covers were used on mustang fox body. 302.
I have two extra NOS 71 style with the stainless. Both pieces are the same part. Would have to check and see which one it is. I think its one of...
There should be 4 different part numbers. A left and right brake lens and left and right reverse lens.
I believe classic lists the reverse lens...
I agree, I would have started with a better pair. It can be fixed but its going to be some work.
The stock 340 intake performs extremely well. The big downfall is it weighs a ton. They also have a tendency to crack between the throttle bores,...
No, anti-seize is not the same as no ox. It was just a joke.
"how is it that you know to use it sparingly"[ATTACH][ATTACH]
Everything I have read indicates a much higher out of the box quality than most heads out there. They cost more but by the time you pay for all...
I heard they were having problems getting valves too. I was getting ready to order them from 440 source and they disappeared from the website.
Not always true. We have big (up to 400 HP) electric motors at work and if you over grease them the bearings will overheat. Sounded like BS to me...
Its already been said but most come powdercoated when new. Yeah, not a problem at all.
I have edelbrock air gap on my swinger and dart sport, both 340's with stock air cleaners. No height issues on either.
My Gibsons Left to right
90's custom shop quilted bourbon burst.
2019 Gold top
2016 Honey burst standard
I also have a 1998 Epiphone les paul...
I buy most all my brake parts from rock auto.
About 25 years ago I ground down a 3/8 extension and have been using it ever since. I ground a slight taper so you can tap it in and it bites. A...
Here is what I have. All have some pitting. All studs intact except one is missing one stud. Let me know if your interested.[ATTACH][ATTACH]
I have a set out in storage I will try to remember to pull out today. I had planned on restoring them but went with the repops instead.
Here is a LH on ebay
1973 1974 Dodge Dart Swinger headlight bezel nos | eBay
This is the last piece I need for the front of my sport.
Im looking for an NOS RH headlight bezel for a 73 dart / dart sport. NOS only, have plenty of used ones. Only need RH but will consider a pair.
There is a six pack non-shaker lid and base on ebay right now. Not exactly cheap but its an original.
1970-71 ROADRUNNER / 440-6 PACK AIR CLEANER...
The last one I bought from Vans Auto had a really good plastic coating on it. Way better than most of the repops I have seen over the years. I...
You should specify which engine, they are different heights.
Edit: maybe not for the 6 pack but 4 Bbls ones are different for sure.
Say what you want. The chicken doing the burnout was some funny stuff. I have 4 chickens and none of them are smart enough to even start a car.