Separate names with a comma.
Don't have that memorized, but they're skinny and have little backspace. My disc brakes are completely uncovered by the rim and tire.
My tire is pretty centered. It runs both sides of the well, LOL.
My 72 swinger with 265/50/15 rubbed before my front sway bar. I have a 3/4 offset mount and shackle kit too.Enough squat or body lean, and my...
I'm sure it's similar inside an actual manifold based on video research I've seen in ports and manifolds, but it seems to be to a lesser degree,...
Anyone willing to bet that the clear box window style intake probably had something to do with how much liquid fuel there was? It's not exactly a...
Lots of talented people that get no attention. [MEDIA] [MEDIA] [MEDIA] [MEDIA] [MEDIA]Love this one too: https://youtu.be/yhdvAu1CyOs
Wouldn't high compression, raised dome and an optimal cam explain the "mysterious" low timing requirement and the high output of the one combo...
He's read all the magazines which makes him smarter than all of us, but he's upset we don't realize it and treat him accordingly for it.It would...
Once the burr is spinning, it will tend to stay straight, but you need a real tight grip on the grinder when it starts. Any stuttering or runout...
Then based on the answer to the spacer question on summit's page, I'd hope they ship one with the recess!
I know that was the case at one time, but it looks like they fixed that? Or at least that's what their reply on that page suggests (I trust their...
Most aftermarket balancers are neutral balance with bolt-on weights for the external balance motors. So pretty much any aftermarket balancer will...
This is one of the threads @72bluNblu posted in with his list.I'm pretty much duplicating it, but with Viking warrior double adjustable shocks....
Those wheels should be made with a relatively hard and durable material like Nylon. Most 3d printers use non-reinforced and less durable materials...
Naval jelly. Easy to apply, easy to remove, acts quick. Oil heavily after with wd40, 3 in one, motor oil or similar. I like gear oil because that...
What do you mean the stones die fast? Do you know what kind of stones they are? Alum oxide (usually pink) will outlast polishing stones (usually...
The hf grinder will make faster work. Those little dremels are great, but not for hogging on cast iron - they get hot, uncomfortable, and stall...
Dremels don't have the power you'll want for porting. A variable speed controller (foot pedal, if possible) for a die grinder is the way to go....
Sandpaper rolls don't catch like that. Just sayin'
All those sharp lines showing your passes with the burr wouldn't be visible if you were using paper rolls ;)Slow the burr down if it catches...
Set screws would suck. I've seen collet style, but I don't recall where or what they cost. Haven't ever bought or used one either, so no idea if...
You can get Shank extentions. They can limit your reach sometimes, but still useful.
Get some stones and sanding rolls. Burrs are great for removing big chunks, but lack finesse until you get good with them. Stones and paper are...
Buy the 3/16 collet. You'll thank yourself!
The car runs great right now, anything else you do is going to impair drivability to an extent. Higher flowing heads will help your top end, but...
Heat and steel wool can make red rust turn blue/black. Red rust isn't much of a problem unless the parts get repeatedly exposed to moisture...
Don't feel bad. I have a box that's mixed sand, slag, and walnut shells because I'm lazy and stubborn. I should've just cleaned the reservoir out...
Dang. I've usually been able to just blow the hose out with compressed air; either by plugging the Nozzle and letting it back-flow or by using a...
If it's the hose which feeds the media to the gun, can you not blow out the clog? If not, I'd get some clear vinyl 1/2" tube from the hardware...
For the guy who does it frequently enough, they'll figure it out. Most of us barely drive that elevation change in linear distance per cruise! LOL
