Separate names with a comma.
Nice wish my project looked that good
Thats a first
What should I use to lube speedo head before puttin cluster back in? 72 Dart
Truck has been thru alot
Got a 60 gal craftsman tank from neighbor head blew for 2nd time [oilless) want to use the 5hp motor with a oil head unit, will build mounts and...
Happy Thanksgiving from TX
Looking for a universal 1 1/2 white face fuel level gauge 0-90 ohm if poss if not others ok
I used a tap screwed it in till just tight and put vise grip on tap then lightly hammered it out
Also offset for fat guys to redistribute weight
How does the tumbler come out?
Ya not lookin forward to that part but I'm retired so its good
72 Dart went to take key out of switch and it won't come out also switch won't go to acc position start and run are ok what do I look for? Worked...
You need stainless to hold up to time travel and room for the flux capacitor
Probably have to cut the hood to stuff that into my Dart
Who needs hp when you could have megawatts[ATTACH]
That would be great if you can get the number for me thanks
What color is the grille on a 72 Dart? Silver? gray? Alumininum?
Ya we created a country full of snowflake crybabies with that customer is always right bs
Thanks for the links I see the groves on the drum thats probably causing it not to read
That is possible quess I'll use the old one it works wanted to use the zeroed out one with new motor that was quite the job gettin all the numbers...
I had the drill on low and just barely squeezed trigger just checked the old one and it works quess I'll use it
72 Dart picked up another cluster to replace mine which has several broken pins, wanted to check speedometer using a drill and the needle bounces...
Thanks for the info lots of scammers these days
Ya I need to pull rotors just remembered I have 2 mustang rotors that need to go to machine shop and be matched to originals
perfect time to...
I'll be drivin the Dart after 3yrs of sittin in humid so tx should I clean the rust off the rotors or will the pads take care of it.
Now the fun begins
I'm the original batman
It looked like the motor was gonna come right outta the frame just before he let off
Never seen a dyno like that works off the axles should be...
Don't know if this has been posted yet
One bad viper
Twin-Turbo Dodge Viper Making 3100 HP Sounds Predictably Insane