Separate names with a comma.
check us car tool read somewhere they took over schumacher's stuff
is the comp cam a solid or hyd? pushrods are different lengths of each.
I've seen them sell from $1200 to $1500
plenty out there running 800-900 hp. running low 9s , how much hp are you talking about?
met him several years ago, he came up from texas with Damon to Cordova Ill. and raced with us in the Victory N/ss race, great guy !!!
how deep is it ?
it depends on the lifter oil band and the lift of the camshaft.
cone type
make sure you put the axles in the carrier to line up the splines before you tighten the case bolts, if they're not lined up you won't get the...
transmissions were not painted .
Google Victory Performance parts, he make the yokes you need
I get it's a high end car but why the wrong shifter????
carb is still dirty, clean all passages again.
the one on the right is a hyd type, it is adjusted totally different . I'd use the left one.
move the dist drive on the camshaft to where it needs to be.
in an a-body I'd do a 470 like suggested with the 240 tf heads if it 's a street car, a friend built that same motor with a 550 hyd cam 240 heads...
Hi, I'll take the gear if you can ship it for the $75 let me know , thanks
thanks , I'll do some checking an pm you.
what is the length please, from bottom of the gear to end
doesn't seem like a 10in. converter would be a full race converter
only see one picture
I've done .060 in the past , no problems
contact Dr Diff, new gears are only $185, used gears might be noisy
Holley #1920 one barrel
no one with any kind of power should be racing with a stock cast iron front drum period.
some one might have milled it in the past to try and fix a rear seal leak
I'd choose metal if had a choice .
if you're talking about the actual shift cable , they usually leak where the cable and the metal meet, it can be fixed with the good shrink...
pull the spark plugs and try it.
do you know the part no. of these and what heads were they used on?
