Separate names with a comma.
Jake... Hells Yeah... I'll be there If the Creek Don't Rise !
Sold out on that last run... maybe after this covid thing becomes history, I " May " make another run of the Round 64/65 A body Shifter Rings......
Right there by the lower trunk latch...It pops open the trunk when you put in and turn the key! [ATTACH]
In My 65 Barracuda, I have removed the Gas Tank after pumping out the fuel and... Removed the Rear Shock Absobers for the needed Wiggle room... I...
Done ! And posted link on my FB page... Prayers for Daniel
Out of my 340 Valiant many years ago... But, how many of you Make something ( useful? ) out of your little disasters of things that happen when...
I like things Plain & Simple as it also makes it Easier to maintain... by letting you get at things when you do need repairs or just Trouble shoot...
Hey 65 Cuda 340... Thanks for this info on these laminated Color Wiring Diagrams... I just now ordered 3 of them. One for my friends 66 cuda......
I USE THE Edelbrock D4B dual plane plane intake manifold and the 273 commando factory recommended filter size and i even have a 1/4 spacer between...
My "tiny" 273 Commando [ATTACH]
Last few days, I was working on Re-Oiling my K&N Air INTAKE Filter! Over the Many Years I have done this to quite a few filters of this type......
My 65 Cuda... being a machinist I made my own adapter.. using black Delrin (high strength plastic)[ATTACH][ATTACH][ATTACH]
Been running my 65 cuda for Over A year after I removed the choke and choke shaft so finally (out of boredom) decided to make "press in plugs"...
Started last night to install that Electric Fuel Pump like I once upon a time had in my race car back in the 70's... When I was working for Ed ......
Doing Underside "Cleaning" and checking for leaks (none found) and making sure every thing is tight... Getting ready for our Arizona Winter Car...
Thank You... But just like my radiator hose clamps, I like a straight shot at the clamp tabs for easy access with my tool (pliers)... :) Sorta...
Well, some one made fun of my plastic fuel filter... It was bound to happen, but I Like seeing my fuel! So I dug out my old glass one from over 40...
Went to car show tonight in Phoenix Arizona to "Test" ( really just an excuse) my MC Heat Shield (post 6270) in a 100° + outside temp... Made it...
Well yesterday I made from a 4" round 8-1/4 long Slug of T6061 Billet (aluminum) a ~Heat~ Shield for my dual bowl Master Cylinder in my 65 `cuda.....
Made from T6061 aluminum that I machined into a Battery hold down... For my 65 Cuda.. Better then napping the days away as I have been doing of...
Well, just pulled the ones I Never Use that came with the car.... and this is what I got... Remember, I'm the 2nd owner ... getting it in 1974...
My 65 'Cuda Rear plate with different Front Support plates... .[ATTACH] [ATTACH] [ATTACH] [ATTACH] This one Below is what I run with the most......
Hmm, my 65 Barracuda did not have the C.A. P. Package... and was built in California for Dealership Sale in Arizona... And I have Driven it into...
Was going to do this a year or so ago... had picked up a slug of T6061 aluminum, but never pulled the trigger as there were better and more fun...
Hey Grimreaper... I have Never seen "quarter" (1/4) inch Masonite, only 1/8 th !!! Your photos do look like Masonite... let me see a "Edge" photo...
It's 1/8 inch Masonite (same material the front kick panels were made of)... 1/4 is Too Thick... just saying... 1/8 Masonite is Very inexpensive...
JR Headers... and the 70 ish Dual Snorkel Hood Scoop... ( i'll add a hood down photo .[ATTACH] .. }
Here's my old "Halfbreed" 63 valiant with 65 'cuda grill... 340 4 Speed... ( note my front Suffolk Raceway license plate ). Picture from 1972-73...
I did make it there... had a good time talking to Peeps and Ol'Friends... I'm next to this 67 Cross Ram 426 Hemi Plymouth Belvedere... [ATTACH]
It's Today!!! And the Weather here in Phoenix Arizona is Perfect !!! i spent most of yesterday getting my 65 'CUDA ready for the Show... Even...
