Separate names with a comma.
Still on the hunt, guys! Please let me know if you have one for sale.
Thank you Cudabnu, that's what I'm after. The one I purchased is a cable pedal from perhaps a later model - the mounting plate isn't flat like the...
I'm still on the lookout for a v8 pedal assembly for my 64, does anyone have one for sale? What I'm looking for should look like the photo in this...
Yeah that sounds good, thank you! Do you use PayPal?
Hey guys,I'm looking for a v8 cable-style pedal and bracket parts to convert my '64 rod setup, hoping somebody has one they'd like to sell.Thanks!
Looking for a 7.25" cover and drain plug. Threads are stripped on mine. Thanks, guys.
Looking for a decent set of 198 rods for a 225 build.Thanks!
In this case, someone who worked on the car before I bought it ran wire from the turn signals all the way back to the tail/brake lights. The park...
I think I've got it figured out, guys. I didn't investigate all of the wiring laying about in the trunk while I was welding in my spare tire...
Sorry if I didn't explain that well. No, only one bulb - initially I wasn't sure if the brakes were activating the blinker (brighter) filament or...
Drivers side wiring... Held on literally by a strand. There are a couple of additional wires that were spliced in and then cut. Why me? LolI'll...
Alright guys, I "borrowed" a dressing mirror from the wife (she doesn't know she agreed to this) and propped it up in front of the grill.Should...
Should've attached pictures. :lol:[ATTACH][ATTACH][ATTACH]
This isn't really the thread for it, but I've been tinkering away with her for the last 2 months. Rebuilt carb, new fuel pump, electronic...
It looks like it had an aftermarket stereo in it at one point, I see a lot of cut speaker wires. Other than that, I installed a GM HEI and relay,...
Man, if that turns out to be the issue.. :BangHead: :lol:I'll go check it out now, thank you.Edit: Pulled the bulbs and the issue is still...
Hey Guys, I'm wondering if anyone could help point me in the right direction with an electrical problem I'm having. I've found similar issues guys...
I bought a set for my '66 from PST, Charlie. Suspension - Suspension Components - Pivot Shafts
Good to know! If I can't find a clap and the round mount together, I'll contact you. Thanks.
[WANTED] - Slant six distributor hold down '81 UpHere's a link from FABO.
Anybody got a claw style distributor hold down they'd like to sell? Looking to convert my 170.Thanks!
Thank you, I understand the setup now. Offenhauser doesn't list the linkage in the catalog anymore so it may be discontinued.I didn't want to...
Hey guys, I read in a thread here that some of you have made a four barrel Holley carb work with the stock early model rod linkage and pedal, by...
Thanks Dan, it was a long shot. This is a 1964 170 manifold that doesn't appear to be cracked. I'll see if I can locate a used spring and if not...
Are the heat control valve springs and hardware reproduced? My 170 has no springs on it. The valve isn't seized, but has been stuck in the "cold"...
I'm in Washington, we're working as of now but a lot of people are either working from home or just flat staying home. Hearing essential personnel...
1966 Dart GT, and a 1964 Valiant 2 door post.
Got a set! Thanks, guys.
I'm looking for a set of 5 dash bulb sockets for 57 bulbs that would fit in my '64 Valiant instrument cluster. The metal contacts in mine have...
Yeah, i was more looking for some cheap steel wheels. I'm they guy who drove down to your place for that 8.25, I'm not ready for another trip to...
