Separate names with a comma.
Ok, so if the force-fed crowd is running just cooler than stock projected-tip BKR7E's, at what point do I need to switch to non-projected for N2O?...
What is the part # for the non-projected NGK's for nitrous? 5.9L Magnum with a hughes steamroller cam.
Can you post a pic of it from the side, setting on the mounting face with a tape next to it so we can see pulley depths?
I bought a '98 Durango with a slipping trans and 189k on the clock for 400. I sold the trans to a local guy as a core for $150, sold the body to...
Yes, the balance is different. Small flywheel with 5.9 Balance.
I'll have to look when I get home. The individual pipes leading to the Y are only about 1.5" - 1.75", but they are most definitely like the bell...
Is the exhaust manifold ball/socket compatible with LA headpipes?I am currently using a Durango Y-pipe, but it hangs REALLY low. Rather than...
I have a coil wire that will let me hook the magnum coil to the LA-style female tower distributor cap. Can the orange box fire it? Do I have to...
So, it looks like it will work fine if I drill a counterbore in the bottom of the bolt hole to clear the raised lip around the bolt hole on the...
That's the plan if this doesn't work. I received it in the mail as I was pulling out to go to work (second shift). I'll know more tomorrow.
I ordered it today. I'll let you guys know...
Exactly. The '74 Challenger set that I put in my '68 Charger had heat shields and had the 4 holes where this one has 3. Your '73 Challenger has...
Dan,I know the magnums all use the narrower top ears and require about .350 spacer on the single offset ear to use the 318 bracket. If it was...
I agree, something is not right, but here is where I get confused.LA blocks (pre-magnum) passenger side had 4 bolt holes where there are now 3,...
I know this question has been asked a thousand times, but I ran into a snag on my second swap...The mounts I have are for a '68 318 B-body, and...
I've seen that one a few times, but always listed as GM. I suppose I should just grab one and see if it fits.Thanks!
Who makes an adapter block to get -8 and -10 fittings off the later model (1998) AC pump?
Pressure is a result of flow meeting restriction. Without having the definitive answer, I would conjecture the "restriction" is the valve in the...
It doesn't seem to load automatically. On the right, there is a column of attachments. Double click and it should download. If not PM me and...
I've been working on a 5.9 Magnum swap into a '68 Charger. Yes, a B-body. I figured the wiring diagrams may help some here...
Seems it won't let me upload it full size. Go to my Photo Garage "67 Charger's garage" I put it in a .pdf. blow it up to 200% or so and it...
I have probably 100 hours into this one here, so i would appreciate it being used for personal use only. I would like to market it eventually...
