Separate names with a comma.
Same here in the UK last year, a normal Pro meet with TF FC etc running would cost approx $300 to enter. Due to the non existent C-flu with travel...
re post 47....ended 2020 with a 10.35@130 best, 1.43 60's still through the muffs full street spec>[ATTACH]
Not 3.23's but my mates street/strip Demon with mild 416, 3.55's 10x28's, ported iron J heads, hyd. cam, don't know spec, around 10:1, 3000stall,...
My '69 fastback was b/halved, 2 x 3 chassis, 8.3/4" narrowed 2" either end with 12x15 s/tricks 14x32's, perfect fit.
Our old 950HP 1.375 x 1.750 billet plated (830cfm) carb pulled 2.0hg@6000 on the dyno, it flows around a calculated 967cfm on our motor in the...
A 2.5" system with 589ci is SMALL, which is why I mentioned this, its the same exact system he ran with the mild 440 which was in the car...
correct and thats not happening with just the exhausts removed@3800lbs, which is why I said "as close to" a 9 sec street driven car. "In theory" a...
Not overthinking it as its prob not going to happen anyway, just a topic of conversation, I personally would like to see the car get as close to a...
We have a 3800lb car that currently runs a mild street/strip BIG wedge motor, best this year so far were 10.3's@129-ish, has gone best of 130 with...
The more efficient a chamber is the less timing you need as we all know, with a small 100 shot I wouldn't worry at all but would come back on the...
60 Foot E.T. : 1.29 1/8 Mile E.T. : 5.85 1/8 Mile Trap Speed : 116.23 1/4 Mile E.T. : 9.27 1/4 Mile Trap Speed : 145 He paid about $12000 for the...
Thats what we bought engine wise for this years brkt racing, a mild 695hp 589ci mega block wedge -13 headed roller cammed motor complete, but only...
Your parameters come out to 904cfm@.95%VE but you don't know the VE at a given rpm. Our 589 dyno pull shows our 950HP with 1.375V and a billet...
I believe the .590 is 272/275@.050 without checking, my buddy ran that cam in his 3150lb 440 Dart to 10.1's@130>132 with MCH Eddys@320cfm, victor...
We all run what we run combo wise with reasons for it but your giving away a bunch there with those good TF heads with that small cam and hdrs,...
NOS is not for everyone but its exactly the opposite of your comment about the fuller wallet crowd in my opinion, how much would you need to spend...
I ran up to a 250 shot cheater kit on my stock '71 340 motor with no issues and also on my original 440-6 motor up to a 175 Big Shot kit with...
If you look at AndyF's 470 build with TF240's he used a 260's@.050 solid roller with 700+lift at only 10.5:1 to make 750hp, the heads are a lot to...
That cam needed 12:1+, at least a 5000 stall and should never have worked as well as it did in my low comp motor but it did, I had the...
Actually just using the calc for yours, 560hp@3200lbs? 4.88/31"tyre....shows this> 60 Foot E.T. : 1.45 1/8 Mile E.T. : 6.57 1/8 Mile Trap Speed :...
My old stock 440-6 bottom end, 9.8:1cr, 2.14/1.81 906's (260cfm) and the old .650" 290@.050 Mcandless sft cam made 530fwhp according to my...
The answer is probably the class, plenty of cars, good all round fun and some cool cars but there 80% street guys having a go@Racing which is what...
I went from a 750DP on my stock headed '71 340 to an 850DP and picked up 1.8 10ths, that was back in 1983 when it still had a 484/284 hyd. in...
Well without going through all the threads this has prob been posted before but here it is again> [MEDIA]Only a dyno number, track results may...
Just installed on my mates 416 Demon, 2 x 650's>[ATTACH]
3318@the line '69 Cuda, back in 1990 stock 440-6 bottom end+.030 BV 906's 2.14/1.81..(260cfm) CC. .650/.650" sft, 290@.050 HS r/rockers Team G dom...
Well I can give you some specs on my mates old Dart@3150lbs race weight.......440, 12.5:1, MP .590 sft cam, Eddy Victor intake, MCH Eddy heads...
Yes f/brake only leaving@1800rpm....and now down to a 10.35 best....2 flats preload..bottom hole, this was on sunday, last time out for us this...
probably not much use to you lightweight racers but our street/strip 3828lbs RR with mono's/caltracs with 1.5 preload/90-10's front and 9-ways on...
No expert on this but our 3828lbs RR has 11.35, 2.77 1stx4.10's, too much really but it hooks good and goes 1.43 60's.....> Techtips - Drag Racing...
