Separate names with a comma.
Ok, out of town for another week. Stand by
Nice looking SRT8, would love to have one, kinda expensive. I have a 72 Dart Swinger 318 auto. Int in a trade plus cash?
Yes, 60 to 65. Came with a new bolt, and self locking nut.
Got the new Moog arm put in today. It is really tight! No play at all. Couldn't even rotate the arm in the bushing, until i had it clamped into...
The 1 in the car appears new, but has a bushing in there. When i clamp the center sleeve in a vise, the other end of the arm still has some play....
Right, the cheap China made ones don't work very well. I ordered a Moog, see how that goes.
Oh yea, its tight. The problem is in the bearing/bushing
72 Dart has a similar set up. Large end of idler arm is clamped between the 2 tabs on the K member.
72 Dodge Dart, Idler arm looks new, but has play in the bearing where it attaches to the K Member. What brand would be the better one to use?...
Does this repair kit work on other A Body cars? Specifically, 1972 Dart Swinger. Thanks. These repair kits can still be ordered from Advance Auto...
The tabs on the frame have to clamp against the INNER metal tube on the idler arm for it to work properly. So the washers have to sit between the...
I'm not fit enough to do it alone, my son helps me with it. I got the 2 front hold downs done today. Will post a pic of the hood and scoop when...
] [ATTACH] underside after painting.[ATTACH][ATTACH]
So I'm only 10 lbs heavier than a production F Glass hood?
Checking it with a B Room scale, comes to 42.5 lbs. I was guessing 44. If a F Glass hood for an A Body weighs 15 lbs (guessing), that makes this...
In my case, with the big 440 under the hood of that 70 Dart, add headers and the blower, just too much under there. Also had an auto spark...
I had a 440 Dart with a Novi 2000 on it. Worked great. Lots of torque and power. Had to have an an electric fuel pump and a regulator. I think...
I will weigh it tomorrow. Hard to find a used F Glass hood. Bucks are limited, or I would get a new one.
[ATTACH] 72 Dart Swinger, wanted to make it into a lift off hood. I'm always workin on the 318, so removing the hood makes access so much easier....
Should be able to. Remove the hood, then shine a small flashlight in there and spot the retainers. On the driver side I did remove the door,...
Right, mine were buried in undercoating, which was in very good shape, so I didn't want to remove the inner fender shields. Passenger side was...
Same here, they wouldn't budge. I just left them up to remove them, worked fine.
[ATTACH] Well believe it or not, I was able remove the washer/retainers from the top, with the hood off. I used several different screwdrivers, a...
Well I have my hood off the car, so seems to be no weight on the spring?
OK, then just pop the round clip off the hinge pin, and slide the hinge off?
To remove the hood hinges from a 72 Dart, looks like the only thing holding it on, is that little washer like clip? I think i can remove the door,...
[ATTACH]Let me look. Just sent the axles to Moser this morning. Going to a 4.5 inch bolt pattern, and will use 15" wheels.
Looks like 4" to bead mount on wheel.". 12 inches wide at sidewall bulge. Tread width is 10". So yes, 10 inch rim width sounds right. I'm...
Ok, updated. 10 inch wide
5 on 4 mags, $300. With good tires, nice shape. 14 inch X 10 wide, 4 inch B SPACE. [ATTACH] [ATTACH]
