Separate names with a comma.
spark plugs need to be shell grounded to work and their ground is the cylinder head. Cant get much better than the head to ground to. None the...
I think the plate is not the right convex shape from a Magnum, You can adapt by bending it with some creative nuts and some pressure.
elaborate on the Gueson Hole theory, that's interesting! Googled it and jack came up.
tried this one? maybe a 10 day license..... http://performancetrends.com/programs-2018/Engine Analyzer Pro v3.9 Installer.exeSo the DD5 is...
so it just asks for stroke, bore and head style? That's missing a key component...cc size! Is DD5 downloadable or is it payed for? I know the...
Put in a custom stroke to get the head CC where it needs to be for 9.5:1.
Ill bite: $400. Unlock it and ask $800. I sold a 60 over O-ringed 340 short block for $400. Was a nitrous motor so the pistons were spotless. I...
The Vortec head had 20 more years of development than the 906. I liked that episode. The should do a 340 Buick to a 340 Mopar.
Is there a bad valve seal? All I ever dealt with were the rock hard plastic umbrella ones (end up broken bits in the oil pan) and the one set of...
scrap iron is about .02/lb here. Hardly the effort to load it up and kick it off the tailgate. But a locked up motor has value in its heads, cam...
He also says it’s an “old wives’ tale” that a properly set up gear drive will transfer undesirable harmonics into the valvetrain. Wah Wah...
Success! Replaced the 4 and we got light, and a functional TV again. This was saved from a customer that was tossing it and it was bigger and...
Just run with the cap off for 20 minutes at idle. if your temp is actually HOT. It will be boiling over. If its not boiling over its not HOT....
the crimp tool sux. when you use it as directed it splayes across the fitting. Use some supports like a vice and it should keep it together enough...
thinwall deep socket with the shaft cocked away from you, then attach the diff end. 4X4 use the same type of 4 bolt flanges.
some 318 cop heads actually have 360 cast in them. 318 Police Heads
I stumbled upon a Hantek Digital DSO5102 100MHz (hacked to 200MHz) for $100 after leaving a Spring Fling with $100 left in my pocket. It...
Its strange seeing a $19.99 torque wrench next to a $109.99 torque wrench in the same store.PITTSBURGHV-Groove SAE Combination Wrench Set, 14...
My sis's Saab 99 (really weird looking car, engine was backwards in it) Was totaled by a drunk. She took him to court and won a civil suit to get...
I'd love to but the Mopar gods wont let me....must be a conspiracy! You do not have permission to view this page or perform this action.
2 hours later and 2 tire plugs...a 4" nail in each of the driver side tires! had to search for my compressor tire chuck. Now I'm drinking my 2nd...
Im rotating the tires on the Mommyvan. Damn, those tires look 1/2 worn compared the the backs that look new. Tire pressure sensor is flipping out...
PM me your theory, I love to hear the other side of things.
a B damper will fit a slant. But good luck finding a B/RB in a boneyard these days. It will stick out like 1.5 inches more though.I dont think...
Seen the chrome, not the fan. Body painted is worse IMHO. Those new rims look great bare with chrome lugs,even without centers.
and if its a reverse rotating boat motor crank, the wick lines are the wrong direction......Now that would be a WTF moment!
Lots of Thule hard shell storage pods here, like this ....Used to see luggage racks all the time on the back trunks of Mustang 2 coupes. [ATTACH]
[ATTACH]
Brother, you ain't kidding! Wife is a big white meat fan (hey, she married me!) but that meat almost makes dust coming off the breast bone. She...
One piece rear main seal...how the heck? I think its still unavailable because.....
