Separate names with a comma.
Well I got it to run. I used the old coil + wire to the new coil + terminal along with dist red and dist orange to coil -It still will not run...
Hey I tested everything with my meter and I do have 12 volts when cranking with the brown (original coil +) hooked to the ignition box small red....
So again, back to the original dist wires, do they just get left doing nothing and taped off?
This is where I think I have a problem in the factory wiring now, I believe I messed something up somewhere because I tried to run the distributor...
Also, 67dart273, I'm assuming your instructions are based on using the factory mopar distributor?? I did have everything connected exactly as you...
Jeez bud I'm really confused now between the msd distributor instructions and the msd ignition box instructions. The distributor instructions say...
I connected the blues to the browns from both sides of the resistor and tied those to switched red at the ign box
Hey guys I've tried everything I can think of to solve this issue I'm having so ill lay it out for u folks and please try to point me in the right...
