Separate names with a comma.
I am not sure if you just insulted me with a compliment, but I will take it. LOL
I lined the lower mounting clips and marked them where they need to be trimmed. I then trimmed that part off, had to bend part of the upper...
I already planned ahead with a phenolic resin 1" spacer. I appreciate the heads up.
That was part of my decision, planning a Sniper EFI for my next mod.
Can't seem to find any decent ones, the are made of unobtanium.I have new ones already
That is what I am finding, that it does
I already have the clips new from Classic Industries. I know they are different, but the look like the clips can be easily trimmed to slid into...
I have been having issues finding a decent lower trunk molding on my one year only 1968 Barracuda trunk lid. I have a spare, real nice upper...
I sent you a PM
I appreciate the info and opinions. I built the engine on a "budget". As cast Eddy heads, cast stroker crank, and Hypereutectic pistons. I...
I agree, but it is just a fun street car engine. I am running 3.73 gears and 2400-2600 stall converter. I went for a bit more of a torque cam...
[ATTACH]
The latest came in today. It was on backorder for 2 months, came in a month early. [ATTACH]
I need the trunk molding or trim piece. I really only need the bottom one but will buy upper and lower if I have to and the price is right. It...
Sale pending
So far I have had a few people message me and one offer, but no money yet. First one to pay gets it. I am also open to trades for 68 Barracuda...
That would make me happy enough, I could do that
Do you have any pics of it installed in your car, showing how low it hangs in the car compared to the K member? I have a 68 Barracuda that I am...
I have a 42 5/8" long driveshaft, made by Precision Shaft Technologies. This was in my 1968 Barracuda with an 8.8 rear end and 46RH/A518...
I have a brand new set of 16 Edelbrock "Roller Cam" valve springs from a set of 61775 Heads. These are dual springs with dampers, 7 degree locks...
They are the Viton metal clad, which articles say Viton is better and higher heat resistance than silicon. SO I think I will keep them on there....
I am pulling it apart tonight. We will see if the seals they say are in there, really are.
It looks like the Edelbrock website calls them a "Positive (Metal Clad)" design Viton seal
Edelbrock gave me the part number and Summit calls them Viton material and have Umbrella in their description. I am guessing that is due to lack...
I have read many say the guides are not ideal.
Good to know. The seals in the heads are Viton Umbrella seals. Anyone now how silicon compares to Viton?Edelbrock 9758 Edelbrock Valve Seals |...
I am going to be running Howards springs and Cam, so I won't be surprised of I head in that direction as well.
Thanks. Any recommendations of valve seals that I should go with for an 11/32" valve stem?
I just bought a set of small block Edelbrock heads and are having the new Howards Cams recommended valve springs put on for the roller cam that I...
Heads are here, Howard's recommended cam springs are here, oil pump came in, now just waiting on the new roller cam:[ATTACH]
