Separate names with a comma.
I was not wearing the lap belt when I took the pic with the shoulder belt buckled.
Front interior view from 71 parts catalog. Separate belts for seat and shoulder. Not sure if this photo has enough definition to see it. [ATTACH]
Pics from me sitting in my '71 Swinger with shoulder belt attached. Do these help? [ATTACH] [ATTACH] [ATTACH]
I'll take them. Sending you a PM.
Fixed! Bad light socket ground. Removed socket. Cleaned inside with emery cloth and electrical cleaner. Cleaned ground wire and mounting screw....
I can’t think of any work I did that would affect just one parking lamp. I tried a new bulb - no luck. I will see if I can get a better ground for...
Hoping for advice on a recent electrical problem. Car is a 1971 Dart.The parking lamp circuit was working, now it is not. The right front...
Still looking . . .
This is the one with the lock ring on the column as introduced for the 1971 models. Need the power steering version. Ship To location is Petaluma, CA.
Instrument Specialties did all the dash panels for my ‘71 Swinger. The work included plastic chrome and wood grain. It looks better than new but...
Alan - beautiful job. Even the redline tires. Thanks for posting the pics.
A little insight into why I wrote this post. A flashback here. It's May 1971 and I'm hoping to make a 1971 Plymouth Duster 340 my first new car....
Has anyone noticed how rare it is to see an A-Body for sale (on any internet site) that is 100% OEM factory correct? I'm not talking about bolt...
For sale is a used quarter window glass for a 1968 - 1972 Dodge Dart. Driver side. This glass is clear, not tinted. No cracks. It is used but...
+1 on the trim tape. I used old road test photos to get mine as close as possible to stock since I could not find pinpoint directions.
Try the how-to videos on the e-bodies.org website by Cuda Cody. I used them to disassemble and rebuild the column in my ‘71 Swinger. Really helpful.
Thanks everyone. So far I have not connected the vacuum advance. The 28 degrees was a starting setting for mechanical advance at 2500 rpm. I'm...
I bought a HF thermal gun. I'll try another start up on Sunday. For now, I've noticed my temp gauge reads into the "Normal" zone even when the...
Dubob, good ideas. I'll look into the Harbor Freight tool. This is the first time my gauges have worked since I owned the car so I don't have a...
Regarding the possible trans fluid leakage I wondered about that. The water doesn't feel greasy, and I spilled enough of it on the floor when I...
An update - I used my Mityvac cooling system test pump with the engine off/cool. The entire system held pressure at 16 lbs for several minutes....
I've used other Evaporust products with good results. I'll give it a try. Thank you.
Made the first start of my newly rebuilt 340. The engine fired right up and I was starting to go through the break-in procedure when I had to...
Mine were not much different. I used penetrating oil to get the bulb out. Then I soaked the socket in vinegar. Some improvement. Then I...
This is an unused, never installed, Grant 846 Classic Nostalgia steering wheel. Similar to factory Tuff wheel. I bought it new and never used it...
Exactly the two electrical experts I was hoping would comment. I did open the alternator and it was burned on every brush contact point. Pretty...
The car is a 1971 Swinger with a 340 now instead of the original 225. I recently finished a complete rebuild of the entire car, pretty much...
Is it originally a CA car? I’ve seen the N95 CA NOx vacuum/temp switch in that spot.
This is a question regarding a factory AC 1971 Swinger. I have a FSM but am still having trouble with the temperature control lever and cable...
I located a linkage set up. Thanks everyone. Without the forum this would not have worked.
