Separate names with a comma.
I bought a set of center caps for my Keystone wheels at Summit 2 yrs ago. You might check them out. Mine are 5X4.5 bolt pattern. Dave
I believe Mancinni Racing has a set of "New" factory style head bolts, along with thier other offerings. Dave
If you have some of the bolts with no holes in them, you can make yourself one. Just drill a 1/8th in hole thru it. Center punch the center of the...
The Grant adopter # for early "A"s is 4310, this is for Darts, and B-Cudas thru 66. I put one on my 66, along with adopter, and it works just...
I have bought two 904s from keith. Never any problems. I Took two cores down to his shop, and got two really nice 904s. I wouldn't be scared of...
Naw........ Thats a $500.00 car, if that. Probably take $15000.00 to get it in just primer.Dave
I have spacers on all three of my ballast resisters, for that exact reason. I don't know if it helps, but I do it.Dave
P O R 15 = Peels Off ReliablyDave
The 66 B-Cuda I have with original door panels, has no carpeting, on the door panels. Dave
My 66 B-Cuda is put away for the winter, but the Factory Service Manual has bulb # 330 listed for fender mounted turn signals. Thanks for the...
Cudamark is correct 66 B-Cudas had no in dash turn signal indicators, only the little fins on the front fenders. Those fin indicators can be real...
I did the same with my 66B-Cuda dash bezel. I kept my origional dash, and used a dash I bought here on FABO. I used the metal part with it. All I...
Conversation startedDave
Still Looking. Remember, the nut tabs can be broke off, I wont be using them. What do you have,???. Dave
Looking for a set of Barracuda Fender fish. They are PN 2785321, and 2785320 left and right sides. The tabs can be broken off as i don't need...
I redid a few electronic distributors, so I built a stand for them, so they don't lay around and get banged up. Black paint was all I had. Dave...
It figures it would be something like that. I don't even know how you would hitch it up. Can it be converted to single pickup. Dave
What years were these in use, and in what vehicle. I just dug one out of my stash. I didn't know they had such a thing. Its a Mopar distributor...
I just put 2 away, they sleep out side. Now they're just waiting for all the salt........ er snow. 66 Dart, and 66 B-Cuda. Dave[ATTACH][ATTACH]
The light looks like a 66B-Cuda license plate light also. Dave
That same blue box is available thru Rock Auto, without the 7500 RPM decal. It says made in Korea on it. I have one of each. Rock Auto is less...
Use to be a member here had an early Valiant, with a B-Cuda front clip on it. His name was Valcuda. Don't know what happened to him, been gone for...
Can any one tell me what the numbers on the SB vacuum advance canister arm mean. See attached pics. I'm rebuilding a couple of distributors, and...
Mtrhead. Yes still for sale. Your inbox is full. Dave
Put an want add in the parts wanted forum. You will probably get a few asnwers, with offers. Lots of guys have changed over to front disc, and...
Thanks to all for the resonces. I made my own. Found some bronze bushings drilled the whole, and filed it down to lenghth. It turned out pretty...
Thanks Rusty, But thats not what I need. I need the plastic/nylon bushing on the bottom of the dizzy that is held on buy a roll pin. It has a...
Any one know where I can obtain the internal bushings and washers that are inside a SB dizzy,??? I was redoing one today and the plastic busing...
I took a Denso Mopar mini starter to Orielys this week to get checked, the guy played around with it in his machine, it wouldnt do any thing. I...
6Cylinder, or V8
