Separate names with a comma.
Unless it's a big hp build or you're racing it, Penzoil 5W30. ..but nobody wants to hear that
to answer your question...if it's a good engine the price is very reasonable! how well do you know these guys and will they stand by it to some...
I agree, but both need to have a cam with the most efficient lo speed torque value at the cruising rpm. The small motor should do better with...
resurrected...but i know guys with 408's that get a ton of effortless tire spin, cruise nicely on the street ...but none get good mileage.
personally i'm ground crazy.I ground the engine,firewall, core support and an external ground even on my electronic ignition module frame
Seems to me some had a ground wire to the rad or core support, but omit it if your rad is aluminum and don't put a ground wire on an aluminum...
Sounds like you are street driving it but want 1/4 mile performance. There will be some trade offs.
An good commercial for Trick Flow Race Tech Hooker Comp Cams Edelbrock Holley MSD Taylor Lucas Oil Milodon Design Engineering Scat and Hot Rod...
sorry...thought you wanted A body.
1/2" - 3/4" won't even be noticed.
I don't think they do anything unless you run your classic in the winter..or gravel? Most guys 'turf them!
about 15 years ago my buddy had a pair of Trans Dart mounts that had worked fine on his Dart. Being the cheap*** that i am i made templates and...
trd-4695
"Hoopleheads"
For me there is a lot of pleasure building and selecting parts. If you have a finished car there's not a lot to do. Build your own and you...
the centres on 14 or 15" are the same.Usually they just take the centre out of the narrow rim and weld it into a wider 14" or 15" rim with the...
i think the 73 and later are shorter so they have much less vertical travel making them less effective.
i've made them...quite easy. get a piece of heavy 2" square tubing about 2 1/4" long and cut it diagonally.Drill a hole in each flat and weld them on!
...and what stroker..372 or 416? is it an A body..B body...Truck?
it will depend on your cam and vehicle weight. 450 hp could be a bit lazy below 2500 rpm. You have to look at the whole package. How did you come...
maybe it is 51 1/2". I'll do a little research.just checked and my info says 51.96" Either should work.
If memory serves me you'll need 52 1/2 ".I have one tucked away but too far to ship
That beast has got attitude! Been looking for a '64 for years and have finally given up.
i see ice blue on some paint codes. Is it actually B3 depending on the year?
i bought a brand new '72 challenger in B7..yes it's darker and very nice as well!
OK....what's the majority prefer....B3 or B5 blue? Just found these 2 beauties in the web.[ATTACH][ATTACH]
OK...first week of February and the old timers are 'sayin you should have half of your hay and half of your firewood left!
was "sassy " available in '70?
found this on the web...[ATTACH]
not really..i don't get attached to things and the fun is building them.An old timer told me "you have to build or buy what other people want" I...
