Separate names with a comma.
Clean it up as best you can, then check condition. If it worries you, grab a different plate off a 5.2 or 5.9 Magnum engine- they're the same....
No spacers, just screw it down. That plate puts quite a bit of tension on the dog bones.
Gotcha. I see now you said it was a 1981- I got distracted by the 1990 EFI stuff. :BangHead:
Is the roller cam any good yet, or did it get all rusted up too? Would be interested if decent.
Mancini Racing Small Block Heater Hose Nipple Kit
The Edelbrocks are still available new- unless there's some subtle difference I'm not catching?
Edelbrock.com: Classic Series Valve Cover for...
Does that thing double as a Taser?? :rolleyes:
Aftermarket only. The factory did not make 5x4 bolt pattern in 15 inch sizes, in case that is what you were wondering.
There are 3 different switches, depending on your wiper motor- 2 speed, 3 speed, or variable.
1970 PLYMOUTH DUSTER 5.2L 318cid V8 Trunk Lock Cylinder | RockAuto
Be careful- if you go under 11s you'll have to put a roll bar in it... :lol:
I NEVER throw those things away- not even the 273/318 ones. Clean them up really well, straighten if necessary. The rolled "bead" is what seals...
Here's one possibility:
New Charger seats in an A body? | For A Bodies Only Mopar Forum
No, the fender letters are lightly "V" shaped to fit the fender crease, the hood and trunk letters are flat. They also come in red or black edging.
Which cylinder is it (hard for me to tell from the pics), and where is the "scratch" oriented? I'd run it and not worry about it *UNLESS* it's at...
NAPA, Advance Auto, AutoZone, RockAuto, O'Reilly Auto should all have them.
Oil pressure sender for use with a warning light:
[ATTACH]Oil pressure sender for use with a gauge:
[ATTACH]They're not interchangeable.
With the exception of some manual trans. HD trucks and hemis, they're pretty much all interchangeable, be they the early gear reduction units...
Garage Sale - Mopar Shock Extensions (speedwaymotors.com)
The old-school solution when running SS springs was to use the longer Imperial shocks.
FYI, if you run the springs rearward, you attach them in one of the three holes in the linkage below the throttle shaft.
That's a linkage spring for the fast idle cam & such.
And you definitely, ALWAYS run double throttle return springs- two forward, one forward and...
^^All good suggestions, plus one more thing to check: It looks like your cable bracket still may be a bit too low- remember, the throttle linkage...
Aussie Valiant VE Safari wagon, LHD conversion with woodgrain sides and full-on phantom GTS re-do... 383 auto.Second choice is a VE...
Be cautious using Magnum head gaskets on an LA- they may or may not have the holes for the oiling passage to the rocker gear. I have yet to have...
Wow... this stuff adds up fast.
Personally, as a half-deaf old fart who can't hear the person in the passenger seat screaming for dear life, the...
Mopar Small Block Coil Bracket Strap (vansauto.com)
Currently out of stock (like everything these days), but they're out there.
Factory smallblock coil bracket:
[ATTACH]Big block coil bracket:
[ATTACH]You need a small block coil bracket, or put a 3/4 inch spacer under...