Separate names with a comma.
Only in certain gears at each tap location.
Low and rev by rear servo , forward and second gears by front servo areas, gov pressure by lower tail...
Yep pull it out, rev band locked on , locking rear tires on 1-2 up shift.
Your welcome hoppy!
@halifaxhops , Here you go Ray;
Going to drop some Iowa plates in a mailer for your wall.Hope all is well out your way, dizzy in my 273 is...
I'll work on that for you!
Last plants I just trans planted are white grapes not shure of type yet.
Darn Mike ;
If it's from our buddy in colorado they should have delivered it to me,
I could.have got it to you quicker than they will now!! Lol.
Sounds like tv linkage issue, with out the correct linkage on the throttle arm of the carb you will not get proper line rise at lower openings and...
Working my a"*" off, did 3 tranny's today, 2 carry in and one rrr.
Done and heading for my chair and a totty.
Yep that's for the early units 64-71 cable or non ,will have all you need.
Rear band lock up is usually caused by high line pressure, high idle apply in rev. or a loose rear band adjustment causing it to cock over and...
I can't tell about rear servo piston being billet or not, but the apply arm pocket is not a sonnax billet part, it does have the billet...
The complete white spring is below the retainer, it should be flush with the case when servo is released, piston is cocked at a angle and bound up!
Yep rear band stuck on. Servo piston is locked in applied position.
Pull it , rear band and band drum are toast.
Trans needs to be apart, outer race of the rear roller clutch will have bolts going through rear of main case in the gov support holding it in,...
Sonnax low and rev piston should be a billet piston.
Mark if I can help with questions give me a pm and will try to help.
Nice to see you had a happy birthday, and road trip is going well.
Be safe and have fun.
See you this spring in minn.
If the trans tried to lock up on the 1-2 shift , the low rev. Band stuck on, that's what caused the bind.
Rear band will be wiped out...
See you there, got Cuda ready .
I'll get a camp site at grounds, will be up on Friday.
Sipping on some templeton rye ,winding down for bed, one day left this week - thank God!!![ATTACH]
Work getting around now, have a good one.
6" hold my beer, I'm looking at 12-14, dog looked out and said f this and went on the floor!!!
Guess I better clean an...
That's ok coffee is hot, that's what counts.
Morning. @Fred Scigliano
Great morning here in frozen DesMoines Ia.
Got 14" of white sh*t to deal with this morning,
I think I'll have another cup of coffee and then think...
Welcome back Mark;
Lon, Des Moines area
Cheers FredAnd a Merry Christmas to you[ATTACH]
And all my A body friends!!
Prayers sent :
Hang in there Keith were all with you and yours.