Separate names with a comma.
Pm on the way
My buddy said when I get around to the 47, I should use the slant with the Weber 45 DCOE setup I have[ATTACH]
I ordered one direct from Sanden IIRC
I bought this shifter from Summit, set it in place and marked where I needed to drill the floor for the front exit cable. I actually made the...
I have 66 2 door sedan doors on my 65 Dart conversion. 65 panels fit perfect on the doors
The wagons have a really large spare tire cover made with 1/2 in plywood - definitely larger than the Barracuda security panel
Nicely done and old school as well with the blue dots
I’ll second using their floor pans. I used both fronts and the right rear in my wagon
you might be referring to the black phosphate coated clips and suspension hardware. Clips can be top coated with paint
To the top
Laysons has those lower rear patch panels for the early A’s - great fit! I used them to repair both of my fenders.
Welcome to FABO! Are you looking for wagon or car lenses? I believe they are similar looking but different between the 2. think for wagons and...
There should be a clip on the rear splash shield where it is bolted to the fender at that little tab
Well, the above post was supposed to be a PM but guess I screwed that one up!
Here you go - some loose ones and some threaded on a couple of shafts. I misspoke when I said they were all black phosphate coated - the 2 on the...
Sure PM forthcoming after I go get some pics
I prefer my hardware to be original so I use the 3 prong castle nuts used in 1965. I have a bunch for pretty much any of the suspension...
Shipping to 22657 please
You could easily spend all day at Luray Caverns including their antique auto museum
Speaking of that Barracuda glass, i will be loading up leftover old doors from the Dart and other cars and rusted out tailgates for a trip to the...
I have a 65 ball and trunnion 833 with shift levers and a conversion driveshaft that eliminates the B & T driveshaft. The transmission shifted...
Yes to the console lights. I’ve already routed the harness to tge driver’s side along with the power window switch harness. I will likely mount...
Lol! I’ve made the cross country drive a few times myself - 5 to be exact. Shipping by FedEx might not be too bad since they’ll ship up to 150 lbs
Got a Std/Std forged crank BUT I’m in VA
Sold! Thanks Roy
I did some further research for another member and according to both a small label on the box snd Prothane website, this kit fits 62-76 A,B, and E...
It’s been awhile since I’ve updated this thread all because of the wiring! Since I have to move the radio to the dash (no room under the AC...
sorrry - no extra tabs