Separate names with a comma.
PM sent, thanks
are there 9310 nickle gears or 8620, street gears??
I sent you a pm, thanks bout the exh valves.
have a question, are the exh valves tulipped under the head?
if , I may ask? spring pressures and flow numbers. what test pressure ?
weights are 607 for piston, pin is 150 gms.
hi, I think you will find, it will idle at 1300 rpm, has very low vaccum. requires total timing at 35 deg, high stall converter, and deep rear...
those are the best rod from mopar. far better over the 645 rod.
1964 to 1967 all 273's
hi, yes, very much looks like J B weld. bottom one can be welded, upper one is close under the deck. not so good, torquing head bolts can open the...
hi, the 64 to 65 heads have smaller (5/16) bolts and different angle , compared to 66 and up, which are (3/8), different angle. all rockers will...
hi, what is the casting number on the manifold? just curious, thks
hi, it's made out of cast iron, later models were aluminum. having a cable made, ask for tach cable, not speedo cable. tach cable is left hand,...