Separate names with a comma.
"Li" from Liberty and "Mu" from Mutual....and it rhymes?... catchy advertising stuff.
Anyone else know what this mark is?
Local parts store , or RockAuto will have the air line kit.
Thanks, but I dont see that symbol in any of the pics in that article, or in John’s add’l info area. Can you be more specific?
This is the smooth pad with ID stampings on my ‘79 360 block. Anyone know what the symbol under the “360” means....?[ATTACH]
Monroe or Gabriel.
New set of air shocks... Under $100...probably in stock at your local parts store.
Thanks again guys!!! Drill bit. method worked... 11/32” bit if anyone needs to do it.:thumbsup::thumbsup:
Dont have rest of the tube... gonna have to buy new one.
Got it!!! Drill bit plan worked! In case anyone else needs to do this, it’s an 11/32” drill bit!
Gonna have to try that.
I’ve tried that. Seems I have either too small or too big piece of rod to knock it out from inside. The stub is only about an inch long and down...
Is there a secret to removing the oil dipstick tube from the block? Mine’s broke off where it enters the block, and the stub is still in there.
Convertible door shells are the same as hardtop doors, except for the locating wedge at the back. It's the glass that's different. That all looks...
Air shocks were originally designed to level the rear of a vehicle when hauling heavy weight. No one disagrees with their usage there. Using them...
Have to disagree here, again. How is putting 40-80 psi in air shocks to level heavy weight and putting 40-80psi in them to raise the rear...
Yup... thats been the range...67’s maybe a bit cheaper.
2500’s too high.., usually 1200 - 1500.
The HP 440 in a Chrysler is called a "TNT".
Shim the engine mounts 1/2"?
Have to disagree here. How is putting 40-80 psi in air shocks to level heavy weight and putting 40-80psi in them to raise the rear different?...
Never experienced that. If your carb’s that hot, you will have fuel percolation problems first.
Mr Gasket 2082[ATTACH]
I found different info...Hot Rods - Iskenderian camshaft specifications
Beat me too it!:thumbsup:
PUULLEEZZE come back and tell us what it is!... curiosity is killing me!:steering::steering:
:popcorn:Its definitely 1 of 5 cams mentioned here...OP, any closer to ID’ing it correctly? :drama:
Buy a new M&H underhood harness from Year One.