Separate names with a comma.
And watch the timing, one wiff of detonation and those Hypereutectic pistons will be in shards in the pan...
add Lunati 20200715 cam to what you already have..
Amazon.com: Chrysler Genuine 4295875AC Oil Pan Gasket: Automotive
YUP, WILL ALL BOLT UP. 1 HOLE IN THE CRANK PULLEY WILL NEED OVALED OUT BUT THAT IS ALL.[ATTACH]
WE HAD TO CUT THE CENTER BRACE OUT FOR CLEARANCE WITH THE STOCK AIR CLEANER.
360 TrueStreet Magnum Build | For A Bodies Only Mopar Forum
A/C Heavy Duty Cooling, 1970 1971 1972 Duster 3 Row Radiator, Slant 6 Engine DR | eBay
Who's radiator is that??
Any pics or details about the upper arm mods?
I have a Slapstick shifter in the "this summer" pile for our '66 Cuda..
don't overlook the fact that the float could have sunk if it's reading empty all the time.
" Back in the day " when these cars were just cars we...
it will fit and the speed lines will line up.
in high school I put a '66 dart front end on a '64 valiant.
Total bolt on. no mods necessary.
WE HAVE THAT EXACT TUBE. DRY AS A BONE!!
I USED A '66 MUSTANG ONE ON MINE. THE CENTER HOLE IS TOO BIG BUT IT SEALS.
YOU DON'T REALLY NEED IT. JUST PRY IT OUT AND CAREFULLY TAP IT BACK IN.
Not really too bad.
Just needs a pull and some mud.
But I'm seeing "pull the coil wire" and "it's the timing".
Not if the ignition is off it isn't....
You guys realize the ignition system is dead if the key is off, right?
Unless you are running a magneto...
I think the one on the other side is the same as what you have..
with the pcv grommet?
Here is the adapter I found
We are considering changing Dany's Cuda to Weld's to pick up some needed offset on the rear( they are the only 7' wheels I can find with 4.50...
Grind here...no biggie...[ATTACH]
IT IS CAPTIVE NUTS
I'll have to look, I parted it to build my first "Total" when I was in high school.
I think I still have the door panels!!
i had a '66.
int was black
put an old school bulb work light under the oil pan on the floor.
won't get below freezing under the hood...
Or better yet, a Magnum swap.
Still a cruiser, but can eat the occasional "hot" street car...
I was really thinking it should be that simple, until I saw the warning on that 788x..
To the bolt on flange from the explorer??