Separate names with a comma.
Alot! With a .557 sft in my last 340 with w-2 heads, i had actual .532 lift at the valve retainer. So the 59* lifter angle doesnt help
Ahhh ok. yes, there are some similarities for sure!
Im not following rumble.... what are you getting at here?
Wow, thats a beaut! But im looking for a dual plane or smaller single plane.
Im going to test fit tonight after work and take some pictures. Poor mans stroker lol
Before i buy a new one, does anyone have a 440 aluminum intake that they would part with? Rpm air gap, performer, weiand, torker..... not looking...
getting the crank shaft tonight! I know there is an area that needs to be machined off, but this could be an interesting piece of hemi fun! 3.725...
Rebuilt for 727 specialties. Was custom stalled for a 904 trans my buddy had built, ended up going with a 10in converter. I have the invoice for...
I have two intakes. One has a throttle body, one doesnt. Located in south florida. $100obo plus shipping[ATTACH][ATTACH]
Pistons, factory Rods, forged factory crank. Pistons look to be new, very low use. Crank will need to be turned. The crank is still std/std....
Brand stinkin New! Cast aluminum B-1 valve covers. Bolted down, engine was never fired. Have bolt down breather tubes installed, with K&N...
Missing the cover first off, but the shifter is in very good shape. Cable has a crack in the plastic cover but fixable! Comes with line lock...
Id perfer something that works. Ive got a TQ off a 77’ 440 from a motor home
Looking for a 750-800cfm carb. Just need a good base carb for my run stand. Ive got all sorts of stuff to trade!
@justinp61 ive got a couple good 727 converters for what your doing if you need
408 with the heads you have, .058 cometic head gasket. With the right cam you should be able to run 87oct. And do mile long burnout while pulling...
Cyl wall pictures[ATTACH][ATTACH][ATTACH][ATTACH]
I fixed my description. I copied and pasted from my other ad. Sorry about that. Not trying to lead anyone astray!
Ill get some close up pictures in the morning
This one is an odd ball. I have a 73’ 340 block that is std bore (4.040) but it came out of a boat. There are no stampings on the oil pan rail....
@1Badcolt head east , you will make it in 2-2.5 hrs.
Im 30 min north of west palm beach, and directly east of lake Okeechobee. Palm city FL
Kimmer is first, ill keep you posted pro fate!
FIRST OFF, this thing is cracked!! But i think it can be fixed. Located in South Florida. id like to get $50 plus shipped[ATTACH][ATTACH]...