Separate names with a comma.
If the engine runs well and the car is driveable dont worry about the numbers you will drive yourself nuts.
Drive it alot and be happy you can...
Precisely, wouldn't that be a sweet bolt on performance piece.
Has UTG sent his clapped out 318 back to Nick's for another dyno lesson yet?
We need a timing chain sprocket that will automatically advance the LSA as rpm increase's .
That I would like to see.
That is alot to sift though, I like it
I now know that there is no such animal as the "perfect camshaft".
Gain in one area and lose in another....
I found this old Motortrend article informative.
Understanding Cam Specs - Mopar Muscle Magazine
I have read your reply several times and it is pretty clear except the part of the 60* "ICA"
The only ICA term I am familiar with is - Installed...
This is the same thing that Jim at racer Brown cams told me yesterday.
I should add that when this engine goes back together with a new cam that I will also be bolting down the same X heads but they will be CNC ported...
AJ you are correct the current cam Comp XR274 HR-10 is a dog below 3000rpm hence my addition of a 3000 stall converter.
I have been playing with...
700ft above sea level
That right there is why I am going to remove the Comp Retro Hyd rollers out of my 340 this winter. Just praying that they last that long.
CCP = Cranking Cylinder Pressure
Some my like this cam, for me it did not work.
It pulls hard in the mid range.
That is the exact hyd roller cam that I have in the engine now.
It produces very low CCP
Look at the intake valve opening @ 6* BTDC
If you would...
Looking thru some old notes on cams, I see where it is not recommended to exceed 165 psi cranking pressure on pump fuel.
Looks like my parameters...
I have been wrangling the same snake for 63 years.
It should be red for ATF, but not all the time.
Clean it good and run it on the rack look from underneath the car with a good light, use your...
That's a lot of oil, should be easy to find.
Are sure that it is not transmission fluid? Like the trans cooler lines
OK I missed that.
What cam does @AJ/FormS run?
91 octane is all we can get around here with no ethanol in it.
Great info here, anyone who is purchasing a cam should read this first.
My plan at this point for my street driven 340 LA 10.5:1 static running on...
3 inches low?
What happens to the driveline angles?
Jerk or no Jerk he helped alot of members including myself. I always valued his technical expertise.
Sometimes ya just gott'a sort the pepper...
I never sought out information on Covid on here. I did that way before I ever started this thread.
See again it's not a "Gubm't" issue for me. I dont give a rat's ass what any of those high priced Bellhop's say in D.C., it's not even on my...
I just verified with Dave that the basic CNC $750 service is per pair.
This an prime example of what I stated in post# 204.
You know if you dont like it here in the USA you have options.
Just the facts
Dont want to make it worse than it really is.
I am trying to get more info
I dont have it yet.
Over the phone Dave said they will flow 280 cfm @ .650