Separate names with a comma.
sorry, backspace is 6.25", offset is +35
wheels are XXRs, 18x8.75, +35 backspace.
245-40x18 front, 255-40x18 rear tires.
Rear: `69 B-body rear end, adjustable front spring hangers on low setting, stock 340 Duster springs.
Front: 340 Duster K-frame, drum brake...
I hated the thought of messing with new wheels so I took the front rotors to the machinist and had them lathe the hub down to correct size....
x2 on B-Quiet Ultimate
I used three rolls and had enough left for inside the rear quarters, needed or not there it helps.
get a soft pad for the grinder and git er done!
Speedhut and carbon fiber[ATTACH][ATTACH]
..with drum spindles, 245/40x18 on the front[ATTACH]
Its way easier removing the glass to do this.
Just scratches the surface. Most guys are adding electrical components that weren't considered when the car was built (stereo, elec. fans, fuel...
EZ Wiring 21 circuit on mine. Using genuine mopar connectors wasn't important to me as there's not much left on the car thats original except the...
JW Speakers, relayed and entire car re-wired. No bulkhead connector.
I had to pie-cut the headlight bucket a little to make it work. The...
The headlight switch is a GM based universal, the wiper switch is original.
At the time, i had the high beam indicator wires crossed so it was on...
My old `71 D400 shorty, it was an apparatus truck for the local FD. It had an industrial 318 and lift gate.
I loved that thing but it was a...
Not white, its a very light grey.[ATTACH][ATTACH]
Pretty darn nice early Valiant in E. Washington, not mine.61 Plymouth valiant
Should be the same carpet as a 2 dr. valiant.[ATTACH]
from the department of redundancy department..
I seem to remember Joe saying they were special order from wheel vintiques or compton wheel, something like that
They wont fit, the offset is all wrong and you'll be struggling to get a 9" wheel to fit without cutting. I won't even get started on spacers,...
There's no answer to that until you determine what rear end you're using, for example; my buddy's blue `69 has an 8.25 rear end, and with my old...
I cut the lenses off of a pair of truck/trailer lights and trimmed the rest to fit inside my existing tail light housings. Electronic flasher from...