Separate names with a comma.
They make great drill jigs for redrilling 4.5 Centerlines....just throwing that out there.
I ran them on the fronts of a 65 for 4 years. Never a problem. Caveat Emptor
Deflate and put a bumper jack base on the sidewall and jack up your car, it will break the bead. Then you can just use a crowbar to work it off...
Ill throw my hat in as 3rd
67 "S" package should include a Sure grip 3.23 7 1/4 with the 273, 383 had to include the 8.75. Is there an orange paint dab on the filler plug or...
PM sent too.
890/1 bars are .850 diameter 318's (no A/C) and slants with A/C
Thanks. 340-318/AC equipped car bars.
what are the part numbers that tell us what spring rate they are? Are the 318 bars, 340 bars, 383 bars? They are going to mic .830, .870 or .890...
can you mic the OD without any paint buildup? That would help with the spring rate.
This is the less seen early style pre 65 (?) coupler with the roll pin and completely rectangle gasket and clamp style. Comes with 2 square shoes...
aldanamerican.com high end billet serviceable street rod shocks for a T-bucket or similar with a short travel front suspension. These are the...
13 or 14?
Thats crazy, $90 for a 90? Is their repop brass or gold? Hats off to your half price!
Id guess they are 5 on 4's by the look of the holes in relation to the hubs?
<<SOLD>>So. Cal. not mine but I've done biz with him and he's a good guy. $300 If he doesnt want to ship, I could arrange purchase, pick up and...
IIRC they are an honest 1". They have to be as thick as the OEM stud height of the 4" BS.
should be a series of numbers right off the bead sometimes in a rough oval boss.
Jegs bought the tooling for that type too. I thought they were Westerns?
They were not made in 66, Centerline Autodrags came out in 71, but thats just trivia. Some said bias ply only.
some help...Mopar Parts | MW860 | 15 X 8 Mopar Factory Style Steel Wheel With 5 X 4-1/2 Bolt Pattern And 4 Backspacing | Classic Industries
Are the flanking bolt holes 1/2 or 9/16?
Sorry bro. Guy came and handed me the money..
Cool, I think Im available sat AM before 10 or after 2ish or sunday after 10. The Dart and the Valiant/Barracuda shared the same wheel well...
5/55 fwy area of Tustin. Im usually available after 5:30.
Yes, bring it on by and well mount it. It fit my 65 Barracuda and was made for a 66.
Thats right, 8 inch bead to bead! Picked these up on a whim but I got a set of Rallyes I'm going to run. These were made for a 66 Barracuda...