Separate names with a comma.
My crystal ball says it's a metallurgy or adjustment issue.
It also says that I'm going to meet a tall dark stranger.......
You'll never regret going with a Dana rear end.
It's good insurance and it looks good doing it!
Pretty much the same problem and the same solution that you came up with.
The engine was in the car which made it worse!
So, the Quick Time was...
Thanks for the response.
Too bad that Shumacher isn't in business anymore.
The reason that I was asking about the bell housing is that I knew a...
I have a few questions:
What headers are you running?
How much of a pain was it to get the bell housing centered to the transmission?...
It sounds to me like the clutch doesn't have enough free play or the disc itself or throw out bearing is faulty.
Another possibility is the fork...
Thanks for the pictures showing the differences.What I may add, is that I run a set of pedals from a '75 slant six car in my '74 Dart Sport 360...
Any '67 to '76 A-Body pedals will bolt in and be perfectly functional.
Post #35 and #36 are both correct.
(For their own reasons)
Well, this sucks doesn't it?
Hopefully you'll get lucky and find out it's not too bad inside.
The least that you'll have to do is replace the...
Just a guess here, Rob.
You found a bell housing for a big block, but it's in a truck?
I doubt very much if the bolt pattern is the same as a 230,...
I don't think it should ''Squat and go''.
It should lift the back end and go.
If it's lifting the back end, the axle is moving down toward the...
Pinion angle, springs, and shocks.
I have never heard of a Mopar having wheel hop unless the springs are very bad or the shocks are terribly worn...
I run a Centerforce diaphragm clutch in my '74 Dart Sport 360 4 speed.
It works awesome, and I removed the over center spring as well, (it tells...
I would be tempted to just shorten one and brace it properly, but I probably would just find the right one.
Either way would work just fine........
I use Pennzoil Syncromesh transmission oil in mine.
I got it at Napa.
You must use a GL-4 oil or Dexron 2 ATF.
Do not use synthetic...
72bluNblu is right, but these different floors are '75 and '76 to provide room for the cat con.
On a '75 and '76 A-Body, with the floor raised in...
What is the budget?
That's the only way we can offer legitimate suggestions.
12s mean a lot of engine.
Gears, suspension, driving technique all...
Nice job, it looks really good.
There's nothing wrong with the 230 transmissions, I've had a few and found them fun........and strong!
All is good, man!
I'm just trying to be funny........
Do you mean me?
I'm also thinking that it might be a truck or industrial application.........
They are definitely not scrap!
I had a '71 Demon with the 230 floor shift, 3:23 geared 8 3/4 rear end and a 318, a great combo for sure and a '72...
I sure wish that i was able to be active in the trade still.
However, after two knee surgeries, back problems, and now arthritis, i...
I believe all of the credit goes to Syleng 1 for the good explanation, i only added my two bits.
Cudos to you for explaining this process so well.
As a journeyman welder myself, i have used this exact procedure with excellent...
Sounds like a cool ride.
Thanks for posting.
I hope this helped you.............
What are the details of your project?
I run one in my car.
Yes, you must remove the over center spring. (It also says so in the instructions).
I'm very pleased with mine and i followed...