Separate names with a comma.
Can't go wrong with Acme:lol:
Thanks for recycling my picture Stan. That was my first race car, back in the late 70's
Steve Magnante tuning his first six pak
Look down in the lifter galley. Mine filled up with oil, so I knew I was good even though I couldn't see any at the rockers.[ATTACH]
My buddy refers to my first gen Charger as a Marlin.
How come they are not the same?
That would make a great family room. Just add a TV and a beer fridge!
A few more[ATTACH][ATTACH][ATTACH]
Went to a local car show on Sunday. Pretty well attended considering it rained on and off all day[ATTACH]
A few pictures from Pumpkinfest in Waterford on the weekend.[ATTACH][ATTACH][ATTACH][ATTACH]
The shower scene from Psycho
That Demon looks like my first car, it was the same colour, and a slant six also. Cool build. Can't believe the hood actually closes.
I looked up some info on X blocks and some of them were severely decked. That would explain the thin manifold flanges.
I bought an autometer 73-10, but have not installed it yet. I wondered if it might work better than the factory gauge with the aftermarket...
The wheel rim post gave me a dumb idea. Could you use an old wheel rim welded to a pipe on an A frame as a roller, and then loop the pipe over it...
The red light looks like the emergency brake warning light on my Charger.
My old 69 cuda.
If you don't find an nos one I have a good used one I may be willing to trade.
Your taste has improved drastically, but I'm still nervous when I click on these posts
275/60-15 drag radials on 15x8 rims with 4.25 backspacing and big bolt pattern axles. They required a little rolling of the wheel lip....
I replaced one rear wheel bearing recently and adjusted the end play so that shouldn't be an issue. I just have a minor gear noise under power,...
Rob, any change in the gear noise now that you have driven it more? I have a very minor gear noise and I was considering trying the lucas...
How many cc's are the stock open chamber heads?
I drove the car to the local cruise again today. I had adjusted the carb again and switched to full manifold vacuum advance. The car idled so...
Thanks Kim. I didn't get a chance to work on it today. Too many home projects.
Why the slotted intake?