Separate names with a comma.
They are from 1973-76 Dart Swingers and Scamps.
Your mailbox is full. Cannot send photos.
Safest thing to do is disconnect the Amp gauge completely.
They have been known to start fires.
The description of your gauge is typical.
I believe these only came on the 75 and 76 Ralley Wheels.
My 75 Swinger has these center cap for the bolt on hub.
Need the center cap, or the complete hub with the center cap.[ATTACH]
As you can see the hub is missing a part:)
Just need the center cap, but would accept the complete unit.
I had two Magnums built over the years: One with the tensioner, one without. Made no difference.
Legendary should have them.
Click on my avatar to get the photo garage. My set up has A/C no power steering.
Will have photos today
I have a set from a 74 Scamp. Same as Swinger.
If you still need it/them let me know. I can send photos.
I have the same issues with the new valve. They are junk. Anything Chink is trash. Now even new "Mopar" parts are made there. How sick.
I have set from a 74 Scamp. Do not know if they are identical to the 72. Things changed in 73 on.
If you need photos I can forward them to you....
Thanks for the info. I plan on having the unit rebuilt in the winter. Just did not know where to start.
What do the numbers mean on a 8 3/4 diff?Mine shows 2070741
Also has an "X" on the left side near the top.
The diff came out of a 74 Scamp, with...
I should have that. Also, for vinyl tops.
If your other contacts do not work out, I could forward some photos.
I believe I have a set. Black.
If interested I can send a few photos.
I run 26" stock replacement 2 row rad for my 75 Swinger with a electric fan that I ordered for 99 5.9 Dakota( now sold) .
Have a March under...
Never measured, just put an electric fan unit. Plenty of clearance for that.
You can leave the bumper guards off if you not into a strict resto.
Bumper bolts: Summit, Year One plus other suppliers.
Contact STEEL RUBBER, Inc. They manufacture most Mopar seals.
Realize, Mopar does Not produce these any longer.
I have a a 90 degree, aluminum adaptor with new, unopened gasket set and another gasket set with 2 gaskets. Can forward photos later today....
Well then: Stay cool:)
Unfortunately, I am not familiar with the Magnum wiring harness and, have nothing to put my hands on to help.
Your are not the first person to...
Hope this helps with the bulk connector.[ATTACH][ATTACH]
I have a diagram I made from my 75 Swingers factory manual, when I was going through the wiring. It identifies the alphabetized location of each...