Separate names with a comma.
anyone make one?
gm with a spacer?
these are the ones I've used for years
there was a learning curve...
a couple of 440 low compression 4 speeds
does 702 vs 703 really make a difference?440 Cam Suggestionsbuilding 440am I off base with these two?
Free Knowledge: AERA To Host The Engine Professional Super WebinarMaybe ask Billy G about his centered triangle dumb down of overlap
WEll I've been wrong before so I'll try again
I first thought the thumper style cams were a fix for low compression motors
but now I think just...
The comp XE 250 Closes the intake at IC 51 ABDC @.006 110 LCA 106 ICL
comp provides similarl cams with 108 and 111 ICL you can calculate the...
Video: Bore Vs. Stroke — Which One Is Worth More Power?
pg 306 this is wrong for a stock rocker and very wrong for the roller rocker shown
many other grinders are the same
for a much better analysis...
Quench: Unlocking Performance Squished Between the Piston and Head
somewhat self serving but ok to start a discussion
Engine Builder Magazine August 2003
my go to guide for small block mopar interchanges
also covers 3.3-3.8 3.5DOHC and 2.0
lots of little gotchas...
Stock TF OD 500-518 through 47 do not shift back to second at higher speeds even with a shift kit. I have the TFOD-HD2 with mods
I was at Transgo...
a good read on the Pat Kelley website
Car UtilitiesCalculating Overlapreferred to but here is the direct link on DCR
good question Richard
actually several related issues
First is quench as in quench the fire
Which is moving two cold surfaces (the piston and...
I just priced out a set of rods which were done but not picked up- family problem
ARP bolts, perfect sizing, balanced, maggged but no side grind...