Search results

  1. famous bob

    Paint whole or take apart

    I probly cant describe this right, but the guy that actually shot my car , could mask the cracks in between the fenders -doors on the inside , from outside the car , worked fantastic, on an assembled car , never seen anyone ese do it !
  2. famous bob

    VFN fiberglass hood any good?

    fit was/is the best of any fiberglass hood I`ve ever messed with, chevy or mopqar !
  3. famous bob

    Cat Whiskers Belt Moldings, Use or Not To Use?

    mine had car whiskers to start with , I replaced them with new ones , drivers side works ok , pass. side is very stiff and have to open the door to roll it down, which could be adjusted out, but would let the window leak more . The new ones leaked on a new 68 , 383 form s I had when I was young...
  4. famous bob

    Hood pins HELP

    EASY --lol
  5. famous bob

    Hood pins HELP

    Dam guy , u should have thot about that before u located the pin there ! Not to say I aint never messed up !!
  6. famous bob

    Hood pin hole size

    1/8'' bigger than ur pin !
  7. famous bob

    Barracuda type s trunk lens???

    ^^^^^^^^^^^^^^^^^^^^^^^^ this stuff used to be on ebay , considered it myself .
  8. famous bob

    Barracuda Emblem

    Send me a pic of which one it is , I have one setting on th4e bench----------bob
  9. famous bob

    68 Barracuda trunk molding top on bottom

    If it lines up w/ the tail lights, I say go for it .
  10. famous bob

    Anyone cut lower 1/4 in front of rear wheels to fit 315/60/15?

    I`ve done 2 cars that way . I slowly and carefully cut the lip off ,and formed/BENT , it to the inner fender shape , which was the same contour of the orig. fender line , one side didnt even need bondo before PAINTING , the other only needed a hair "ABOUT 1/16'' because of diff metal hardness ...
  11. famous bob

    2 oblong holes on radiator core support? WTF are they?

    out of all the mopars I`ve owned , I dont remember those on any---------
  12. famous bob

    68 Hurst Hemi hood

    I`ve resisted posting on this thread , but my 68 barracuda fiberglass hood w/ a 6 pack scoop was dam near perfect , gapped great and fairly smooth ! They had a special back when the company changed hands (I THINK) , I gave $400 for it shipped , about 10ish yrs. ago ! -------------A little...
  13. famous bob

    Side stripes

    PHEONIX GRAFICS , add on the right side-->>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
  14. famous bob

    Anyone have the US Body Source SRT 440 Hood?

    I agree, but I had an L-88 fiberglass hood on my 406 vega , w/ a kick *** paint scheme , looked way cool ,everybody wanted to know what scoop it was ,
  15. famous bob

    Anyone have the US Body Source SRT 440 Hood?

    Agree, it looks too much like the old ford scoops ------jmo , sorry.
  16. famous bob

    Guys, I think my hood is flying!

    Air pressure under the hood /in engine bay, u must have a weak spring or something worn . Might try taking the rear cowl seal off to relieve the pressure some -------??
  17. famous bob

    Wax?/Polish?

    Anybody know how/what to use to get swirl marks out of black paint ??
  18. famous bob

    Are these moldings stainless steel, and can you braze them?

    looks like 68 barracuda rear trunk trim , too thin to do anything but heli arc > by a pro !----------jmo
  19. famous bob

    What Color Engine Bay?

    I vote , get the outside of the car all one color to start with, the engine bay , body color or satin black . I think patina sucks and looks cheap = unattractive !!
  20. famous bob

    can you tint white car paint?

    I know two excellent body men that did !
  21. famous bob

    opening the wheel opening for big tires

    I did before paint , took my time , very little body filler to finish out , very little . Only pic I have at the moment , made a template of fender contour/curve and bent/formed the same up to the inner fenderwell , came out perfect , front edge only. Those tires are a little over 29''...
  22. famous bob

    67-9 Barracuda front spoiler

    Cant tell from the small pic , but ''randys spoilers'' sure has a nice looking one for the 67-8-9 fishes . I read that some 68ish camaro spoilers can be made to work too--- I`d like to have one for cooling help , but my car is pretty low to start with now .
  23. famous bob

    In search of trim repair

    Partsmonsta in florida . On here at times ---------he did my front grills and did a really good job !
  24. famous bob

    Unlimited Performance Fiberglass Products??

    I BOUGHT AN UNLIMITED (I THINK) RACE / 6 PACK HOOD ABOUT 10-12 YRS AGO , CAME OUT OF CALIF. , AND FIT IS EXCELLANT . USED ICE CREAM STICKS TO GET ALL THE EDGES/ CRACKS LINED UP WHILE FITTING IT , the hood pins were the hardest part --well satisfied w/ it.
  25. famous bob

    Help w/'68 cuda t/lites

    Not arguing , but mine didnt have them at all -------
  26. famous bob

    67 Dart Remote Mirror Demystified

    I tore one apart and put it back together and sold it , couldnt find any longer cables to use in it that I could rig. , and didnt want to spend a lot of time on it back when building my car , had too much to do .
  27. famous bob

    Trunk lid alignment

    cool----
  28. famous bob

    Trunk lid alignment

    I didnt read all the posts , I went thru the same thing. Dont mess w/ the himges ''if'' the gaps are right , grab the corners of the trunk lid while its open/up , and try to twist it in the directiuon to level it out . a couple of healthy pushing and pulling will bring it to where you want it ...
  29. famous bob

    72 front fender brace

    in the pic , it looks pulled out !! I`d hook it up and fagitaboutit
Top