Separate names with a comma.
Not sure if it’s not synchronized, or just so F’d up it won’t go into first. I didn’t think the 435 came with a 4.56:1 first gear
Here’s some old pictures of it before I cleaned it up. [ATTACH] [ATTACH]
The trans is still in the truck. Here’s some more numbers on the passenger side. [ATTACH]
Hey guys, I just recently bought a used 4 speed for my RamCharger. The guy said it was an NP435, but it’s got a PTO port on both sides like the...
Just converted my RamCharger to manual brakes for RB valve cover clearance. Brakes feel better too! [ATTACH]
I finally got everything together and working. Went for the first drive and found out that the NP445 I bought off of the failbook market place is...
They’re here! Time to bolt them on and go for the first drive! [ATTACH]
If you were to add a cooler to the return line, it would just increase the “set amount” of fluid. Just like an oil cooler for an engine...
I would rather just get a small oil cooler for the P/S than mess with line pressures and Ts
I’m not near mine to measure it, but it looks like it could be from an 80s truck
I’m going to keep my trailer a secret from my “friends” for as long as possible
That’s exactly why I don’t want to use my parents “shed”
Now I’m starting to wonder if I should get a 10k trailer with the 5200lb axles. Because I’ll also be pulling my RamCharger around. How much weight...
That would go behind my Dad’s F550 pretty well lol
I would think it depends on what the main frame rails are made of. Most of the standard 7k lb car haulers I’ve been looking at have a 4” C channel...
Has anyone heard of a “Max Built” trailer? It seems that’s what most of the new ones are around here. They don’t seem too expensive, and they look...
I really like how the frame comes out in front of the wheels on those Carsons. Seems like it would protect the fenders and wheels. And functions...
It seems like all trailers have gone up about $1800 in the past few years
I’m going to be looking for a car trailer soon. I’m thinking I want an 18’ steel deck with the standard 3500lb axles. Aluminum trailers are cool...
Checked the installation direction of both rocker arm assemblies and they’re good. I pulled an assembly off of my Duster and bolted it on, NO MORE...
Pretty sure mine aren’t slotted. Sounds like I have them installed correctly. I’ll double check tomorrow though
The oiling holes in the shaft face down, right? That’s what the wear marks on them show.
I swapped the rocker assemblies from side to side. At first it was distinctly louder on the passenger side. Now it’s just barely louder on the...
Pulled the lifters out and they all look and feel perfect. From what I can see through the lifter bores, the cam looks great too.
Well it’s not an exhaust leak :( How much side to side movement should the stamped rocker arms have when not under load?
I just ordered some of this to go with my copper gaskets. Permatex 81878 Permatex Ultra Copper RTV Silicone | Summit Racing
Our 07 Hemi Durango was doing something similar. It was a bad fuel pump. Before we replaced it, we could beat the bottom of the fuel tank with our...
I’ve used those before, but don’t have any. I ordered some nice gaskets and some copper gasket maker. So if that doesn’t make the noise go away,...
Yes, the heads were rebuilt by a machine shop. They were pretty rusted out, so they needed all new valve guides and seats.
If the manifolds are from 1984, then the rest of the exhaust is probably not stock. So any headers that are for stock exhaust probably won’t fit.
