Search results for query: *

Looks like something I would drag home. If the frame rails and torsion bar cross member is good not a bad deal.

It seems like the control arm bushing are freeze to the bolt. I tapped on the bolts pretty hard and they didn't move.

I found a couple of 73-76 darts with the upper control arms still attached. I got the nuts off but I could not get the bolts to move. Is it just me or these bolts hard to get out. I hit them with a hammer but they are hard to get to. Is there a secret?

Is the trunk lid the same on a 4 door and 2 door on the 67-69 dart? I think it's the same but want to make sure.

So you need a pontiac rear end:)

I owned a low mileage 79 400 4speed ta. Loved the car fun car to drive. Owned it for 10 yrs but when my wife blew the doors off of the t/a in a new 93 mustang cobra (which I still own) I realized how heavy and underpowered the pontiac was. I sold it shortly afterwards. I much would rather have...

I have wants left of a 69 cuda. The doors are really nice and it has a few trim pieces left. The rear is a 7.25. oes have the air-box. The k-member is gone but it The parts are located in N.Ga. Thanks

I'm needing a pair of 8 3/4 axles that I can cut down. I need the axles that do not tappered down before the spine. These axles come in some trucks and C bodies. I'm wanting to changed to 4.5 bolt patteren and use the larger brakes. This is for my 69 dart with 8 3/4...

I drive a 2003 m5 to work everyday and there's not much on the road that compares. BMW's are like Mopars you got to know what your doing or it's going to cost you to find someone to work on it.

I sent you a PM but haven't heard anything.

Reading your comments Jason says to me you seem like a good guy. I enjoy your show. I understand this show is more about entertainment than about doing a concours restoration. Now if you would give me a good deal on a dart fender:)

I bought a 69 dart convertible that has a broken rear quarter glass. Does anyone know if the rear quarter glass the same on hardtops and convertibles?

The Hayden clutch 2765 solved my clearance problem. I bought the mopar fan kit. The clutch was too long but the fan worked with the hayden clutch.

Need a right side fender. The more rustfree the better. Located in N.Ga 423-508-2952

Needing a trunk lid. I have a friend that can pick it up tonight. Call me at 423-508-2952.

I highly recommend the new improved moog front strut bushings. Much nicer then the original. http://www.moog-suspension-parts.com...rod=MOOG-K7026

I had a problem recently with a 440 popping through the exhaust It ended up being a broken valve spring. Thought it was a electrical problem. The comp cams valve springs were brand new. Still can't believe it because it ran great.

Here's how is was on the car. Haven't cleaned it up yet. It has the number 25 stamped with what looks like a P stamped in the middle of the 25.

I bought a 71 duster last weekend and it has a second much smaller fender tag. It has the standard size fender tag but it also has a smaller tag with the # 25 stamped with what looks like a p stamped in the middle of the 25. Anyone else seen this before? The car has lots of options but I have...

I like the new SRT8. The most high performance charger in dodge history. 2 doors or 4 who cares this thing would run circles around any other charger that dodge made.

You can thank the Cash for Clunkers program for having a hard time finding a used car.

I had the same problem. When idling the headers would slightly hit the steering box. I slotted the two upper bolt holes on the steering box. It tilted the box over another 1/4 in. I didn't slot the lower bolt hole. Solved my problem.

I built a stock compression 318 a few yrs ago. I used this cam and advanced it 2 degrees. It is very important to degree the cam. Mine was 2 degrees retarted with the cam installed straight up. Had to use a 4 degrees advance key. http://www.summitracing.com/parts/SUM-6901/ I was really...

These are cheap but they work. http://www.harborfreight.com/air-tools/hammers.html

As long as the U bolts fit 3 inch tubes and must be at least 7 inches long they will work. I bought these. http://chucker54.stores.yahoo.net/mancini7ubolts.html

http://www.manciniracing.com/ http://chucker54.stores.yahoo.net/ensu.html

Are 8 3/4 shock mounts the same on a & b bodies?

Sold it and bought a 69 dart.

Thanks I hate to sell this car because it runs and drives really nice. But I have another project I'm trying to get finished.

Hate to sell but I need to get another project finished. Georgia car. PM please! http://chattanooga.craigslist.org/cto/1914651765.html