Search results for query: *

  1. subcom

    Goodbye Torqstorm, hello Spoolius Ceasar

    I use the Cherry Hall effect sensor on crankshaft and the factory magnum distro for cam sensor.
  2. subcom

    Goodbye Torqstorm, hello Spoolius Ceasar

    If I ever ditch my MS3 I might go with the MAXXECU hardware. They do everything plus support the 8 speed 8HP transmissions all in one box. MaxxECU - The modern ECU
  3. subcom

    Goodbye Torqstorm, hello Spoolius Ceasar

    Do those new MS3 “lite” boxes support sequential injection for 8 cylinders? I think that may be the trade off for the lower price.
  4. subcom

    Goodbye Torqstorm, hello Spoolius Ceasar

    I have the CAD for the trigger wheel somewhere. I had it laser cut and then machined the back of the balancer a bit to allow a good fit and tacked it in place.
  5. subcom

    Goodbye Torqstorm, hello Spoolius Ceasar

    I love my ms3 and all of the extra built in features that negate the need for all of the other extra “boxes”. For cam sync I use the factory Magnum distributor. Easy peazy.
  6. subcom

    Anti roll bar?

    My ‘60s are no where near as fast as you guys but I built my own tri 4 link and had bad body roll until I installed the ARB. Now it launches straight and is really stable down the track.
  7. subcom

    RMS rear 4 link, not symmetrical?

    That’s pretty close I’d say. Bounce it a few times front and back and at all corners and measure again. I’d bet it’s impossible to keep static measurements.
  8. subcom

    Bait & Switch BS at Home Depot! (Caution! I'm still worked-up here...)

    Home Depot to pay $2 million settlement for overcharging customers
  9. subcom

    Custom 3D printed headers anyone?

    If you can CAD it the tubes can be bent and cut to your specs. It still has to be all welded together though. We’re not quiet to the point of 3D printing the whole thing but the tools and processes are improving all of the time.
  10. subcom

    Custom 3D printed headers anyone?

    Well partially 3D printed anyway. My employer is now doing custom tube bending and cutting and we worked with TFS to build these custom headers for a show. That collector was actually printed in stainless using DMLS, Direct Metal Laser Sintering.
  11. subcom

    [FOR SALE] PTC 727 9.5” High HP Converter

    Great deal. Save hundreds on this one and avoid the wait and shipping fees on a new one. Thanks
  12. subcom

    BBP conversion

    My mistake. I thought we were talking about the DrDiff 11.75”. 15” steelies are tight on those.
  13. subcom

    BBP conversion

    The DrDiff kit is very complete and works 100x better than any factory brake setup. Just keep in mind that it will push your track width out a little on an Early A body. Tire clearance might be an issue and you’ll need a 15” rim. Factory 15” steelies will clear.
  14. subcom

    7875 + 5.9 + E85 + Megasquirt

    It’s a 3.5” model from Nextion. Their editor software is easy to use for designing your display layout.
  15. subcom

    7875 + 5.9 + E85 + Megasquirt

    Rainy day project. Thinking about retrofitting the factory dash with custom gauges, pulling data off the Megasquirt CANBUS. This is my proof of concept using a small embedded board with CAN transceiver and a programmable HMI display.
  16. subcom

    [FOR SALE] DR DIFF 11.75” Front Disc Kit

    Bump on a smoking deal for a nearly brand new brake setup.
  17. subcom

    Goodbye Torqstorm, hello Spoolius Ceasar

    I bought the 4 pack of the Snows Boost Juice 50/50 meth/water mix and haven’t even used the first bottle completely. It lasts pretty long unless you’re daily driving and constantly spraying the stuff. It’s like $50 on Summit.
  18. subcom

    TBM Brakes

    TBM is making front disks for our cars now. Popular option for you racers that want really lightweight setups. 65-72 A-body Mopar 10" Drum Spindle Medium Duty 4 Piston Front Brake K
  19. subcom

    Mopar A-E Body parts for Sale - FaceBook

    Probably a Scam. Same phone number, different email under a different FB Page. Try emailing this guy and ask him about your order.
  20. subcom

    [FOR SALE] PTC 727 9.5” High HP Converter

    Bump 9.5” PTC torque converter
  21. subcom

    if i build a BUDGET 360.... LA Vs Magnum 5.9

    The 5.9 Magnum is a great platform and usually more readily available in the junkyards. There’s a great forum for this and you can probably find answers to all of your questions there. Magnum Engine Swaps
  22. subcom

    7875 + 5.9 + E85 + Megasquirt

    It’s one a buddy of mine had made several years ago by Circle-D, used briefly in his turbo Dakota and has been sitting on a shelf since.
  23. subcom

    [FOR SALE] DR DIFF 11.75” Front Disc Kit

    Selling complete kit minus the spindles. This is the stage 2 kit with drilled/slotted/plated rotors and stainless hoses. Practically brand new with less than 100 miles on everything. The brakes work great, I just want something a little lighter and more track duty. Still on the car. I’ll remove...
  24. subcom

    6.4/8hp70 finally up and running and ready

    Congrats! Looks really clean. What controller are you using for the 8HP70?
  25. subcom

    Sleeper with Fender Skirts?

    Yeah, not a good look, lol. I’d have to extend them all the way to the pavement to hide the 295s. Anyway, was a fun a little exercise.
  26. subcom

    Sleeper with Fender Skirts?

    You would be correct. Pricy devils. Thanks
Back
Top