Search results for query: *

  1. 75Sport

    76 360 motor

    Any idea of how many miles are on the engine? If all the suggestions above don't correct the problem and the engine has lots of miles on it I might be the slop in the timing chain. Of course you'd have to tear into the engine to replace the timing chain but it might be a last resort for you.
  2. 75Sport

    What would they be worth?

    I doubt if any one would stash 2 junk engines in a trailer. They probably had worth and value to whomever originally decided to keep them. The suggestion of being up front and asking if you can check them out for damage. I'd bet he'll have no problem. If the blocks are shot them offer him a...
  3. 75Sport

    1972 Plymouth 340 - 4 speed - 355 gear - Carburetor Suggestions

    That is a beautiful Duster!!!
  4. 75Sport

    360 Rebuild for 1974 Swinger

    Try warming up the gear to 200f if there's no burrs on either the cam snout or the gear. Your doing fine! Take your time, lots of lube and it'll all come together. Dan
  5. 75Sport

    Hogged out the small end...

    "We can rebuild him! Faster, stronger etc. etc. etc." Dan
  6. 75Sport

    Hogged out the small end...

    Nice!! Good luck with the knee!
  7. 75Sport

    Lowest optioned mopar you’ve seen

    When I was a kid I worked part time after school for a guy that had an A100 van with nothing but a heater/defroster and one seat. He used plumber strap to anchor a milk crate upside down to the passenger side floor and wired a old cushion on top. That was my seat as we drove around town...
  8. 75Sport

    who went to indy and

    My brother went and took his leftover 70 and 71 Cuda parts. Sold the trailer full before he unloaded it. He and the buyer were both happy.
  9. 75Sport

    Saying thanks

    My mistake. Getting old. Sorry.
  10. 75Sport

    Saying thanks

    Joey have you ever considered a trial period for newbies before they could sell or buy? Or would that cause you too much grief? Dan
  11. 75Sport

    New 408 build finally started

    All the better! 327 is a good engine ! For a Chevy.
  12. 75Sport

    New 408 build finally started

    Tell him to mill a set of 2.02 heads and use the old 350 hp hydraulic cam, headers and it'll run 15' s and sound lumpy. Dan
  13. 75Sport

    426 small block stroker

    My frankenstroker consists of a K1 4.125 from a member here. Used Callie's rods 6.2 and custom DDS pistons. Yield is 420.93 ci. Dan
  14. 75Sport

    Christmas Presents, Whatcha Get?

    Scored front and rear fibreglass bumpers for the Dart. Need to find someone that does Cosmichrome for the ultimate stocker look.
  15. 75Sport

    HAPPY HOLIDAYS

    Thanks to you all! Dan
  16. 75Sport

    HAPPY HOLIDAYS

    Just wanted to wish all of you the happiest of holidays! I haven't been on much as life got in the way with my sweetheart being diagnosed with cancer a year ago. She's a fighter and will beat this thing. We're heading down state for 9 days starting tonight. Going to spend the holiday with our...
  17. 75Sport

    Anyone ever run Speedmaster Heads on their small blocks

    j par. You need a break. Take a long Thanksgiving weekend next week. Dan
  18. 75Sport

    Anyone ever run Speedmaster Heads on their small blocks

    Please see post #39 above. Bought heads bare but CNC ported. Installed Ferra 2.055 and 1.60 ss valves with comp roller rockers, beehive springs, light weight retainers etc.
  19. 75Sport

    Anyone ever run Speedmaster Heads on their small blocks

    Due to life getting in the way here she rests on the stand. Hopefully over the holidays.
  20. 75Sport

    Anyone ever run Speedmaster Heads on their small blocks

    Kim, Sorry I don't have hard numbers. Dan
  21. 75Sport

    Anyone ever run Speedmaster Heads on their small blocks

    You're right. I epoxied ss studs in those two holes. Can't even tell.
  22. 75Sport

    Anyone ever run Speedmaster Heads on their small blocks

    I have a set on my 421 small block. I ordered bare but CNC ported. Machinest installed 2.055 & 1.60 and stated they were as good as any and better than most. Only flaw was on two of the ports the CNC cut into the valve cover screw holes. Dan
  23. 75Sport

    My Magnum OBD1 to JTEC OBD2 conversion

    Steve, First you made the bible on oiling mods for all of us to use and now this. Thanks for all your thought and time put into both efforts! Dan
  24. 75Sport

    Anyone know where I can buy these forged pistons off the shelf made from better quality material.

    Don't overlook DSS Racing. Did some custom work for me that was outstanding at a reasonable price. Dan
  25. 75Sport

    W2 Stroker comin together!

    Going scream in that Swinger!
  26. 75Sport

    First engine build question

    I'd be surprised if the poor guy visits the site again. Happy Thanksgiving to all my MOPAR brothers and sisters!! Dan
  27. 75Sport

    Son wants to go into Automotive Tech

    Rob's right. I guess it depends on how smart someone is. By smart i mean capacity to learn. If you're smart get the highest level of education you can. Go for the best paying job you can tolerate. With an upper level education you'll have the money to enjoy your hobby. Skilled trades is the way...
  28. 75Sport

    Plymouth Silver Duster

    When I first saw it I suspected some foolery was taking place showing a fully restored Duster. What a beautiful car! You often hear references being made about "time capsule cars" but this Duster truly is. Enjoy it as much as the PO obviously did. Dan
Back
Top