Search results for query: *

I recently picked up a set of ported 340 heads were done by a machine shop.The heads had 2 bent valves. Apon removal of the valves I noticed there was no valve seals on any valves and the valve guides were two different kinds of material (exhaust are brass,intake was steel) at lease that's what...

I have a 318 in the car now but i'm putting in a 360 come fall.the water pump outlet is on the opposite side for the radiator. Is there any concerns if i use the 318 water pump.also the 360 is not stock (cam/intake/carb/pistons/ect) should i use a high volumn water pump. Thanks

When I accel normally I get a slight hesitation ,but when I try hittting the gas hard from a start it pops hard and stalls.I set the timing at TDC and adjusted the carb fuel mix screws but it doesnt help.Thanks for any help

I have a 318/340 that hasen't ran in about 4 years. I wanted to prime the oil pump before I turned the motor.So I didnt line up TDC and pulled the distributor and gear.After I prime the pump is there any other pre start up I should do and when I reinstall the gear does it matter how the gear...