Separate names with a comma.
What happens when it's hot when you try to put it in reverse? If there's a crunch/grind, your clutch is likely to be dragging.
A cold A833 can take a surprising amount of effort to shift until the gear lube warms up. Keep in mind that with everything turned off, the teeth...
My new heads are still in the box (after some massaging by PRH) for a year now... I was supposed to put them on this winter, but life got in the...
Cruise-in at O'Reilly yesterday evening. After half an hour or so, naturally a rain cloud came and sat right over us. Just a couple of big...
Did you ever check your tach accuracy? I have found some unpleasantly large errors especially at "low" rpm (3000 or less) in more than one tach,...
The dealership IS being sued, but as already noted here, the shyster who works on commission, scratch that, I meant the plaintiff's attorney, is...
You got the first part right. However, secondly you are full of crap. I have been doing clinical occupational medicine (aka "work comp") for 25...
I think AJ runs so hot because he has a hi-temp thermostat? I'm just not comfortable running my big-block that hot.My car already has a dual 3"...
I have the same hood and my 451 (Contour electric fans, aluminum 3-core rad) will idle at 182 degrees in traffic all summer long... but warms up...
Cruise-in & car show in Willow Springs, Mo. (about 20 miles away). Had been scheduled for yesterday but showers and clouds postponed to the rain...
I agree... since his plugs still look dark, the primary mains are probably still too rich. It's surprising how lean the primaries can be for a...
'62 Chevy "Carryall" C10 with 250 in. six and three-on-the-tree. I'd been driving tractors for a while before that, and knew how to shift a...
Yes, that is frequently said and is completely wrong. This misinformation keeps popping up (and I think Holley tech is still telling people this)....
Aluminum conducts heat very well, especially compared to phenolic or wood... if you're trying to keep heat out of the carb, that wouldn't be the...
First cruise-in of the year, at Autozone this week. Decent turnout, various makes including a flathead Power Wagon. Owner said it was pretty much...
Didn't work on the Dart, but yesterday evening it was a perfect 76 and sunny. Drove it to a car club meeting at the local BBQ place, also put 8...
Somewhere I read that a major determinant of transmission torque capacity is the distance between the countershaft and mainshaft. So boxes with...
Got the Dart out of the garage for the first time since October... charged the battery, aired up the tires, washed off several months of dirt and...
Good to know, since I picked Schneider from an internet search... I had them reface my mushroom lifters and cam when I built the 451, since some...
True... but since I got rid of the 318/auto and replaced it with a 383/4-speed, it worked for me! :thumbsup:
When I was a fair bit younger, the old "hose clamp on the steering column" secured my Sun Supertach II :)Edited to add: In my '72 Dart, I have...
I have the same mini-tubbed configuration... but have a fuel cell in the trunk, so the tailpipes were mucy easier. Off-the-shelf 3" tailpipes...
I prefer to use my set of Clecos instead of sheet metal screws... although drilling 3/32" holes is required :) (If you're not familiar with them):...
I only have 41 years experience wrenching on my vehicles, so #6 plug is a little harder for me. :rolleyes:Also I don't have two elbow joints in...
My 451 Dart is of this variety :D
I don't think that will hold a 500 hp big-block even without the nitrous.
Probably should include a reminder to remove the coin after using the kill switch :rolleyes:
How is the ground clearance?
I don't believe they would work well with a 440. I have the set in the BBD pictures, and it's tight in places with the B block (but minimal...
The problem will always be legal liability. No manufacturer is going to guarantee that you can't possibly be hurt doing [insert activity here]....
