Separate names with a comma.
We installed a 1 wire 1991 Toyota Four Runner 2.4 L alternator V belt pulley 60 amp on a Super Comp car over 10 years ago. Does the job to this...
Nothing wrong with being different,I was criticized for years about wasting money on Slant 6 engines. I had window decals made that said,, "You...
Did this one years ago 1994.If not for the wheels and tires it looked like everyday grandma driver. [ATTACH] Slant 6 usual mods.Intake, carb,...
As they say "Go BIG or go home ! "
All I can tell you is I put power brakes on my 63. I did have to modify my brake lever from the pedal to the booster by cutting a section out and...
Lots of 318's get stroked to 390's.
Yep. Valve seals,clean up the heads,new timing chain and gears.Re-gasket, good as new.
I put a early 85 (block dated 84 roller 318 cam engine) in my truck about 10 years ago still going strong. Best part it was free. Also you can run...
Anybody watch NCIS ? Common to see Snap-On boxes in the background.
I think I have 7 ,, That I remember,lost count.
I still have my Snap-On boxes from 1976..The largest boxes they made at the time. $1200 for the pair,weekly payment was $10.
She's a cutie !
Not sure of the year but around 1975 on the big block Cordoba/Charger the lower hose is on the passenger side. You may try from 75-(78 the last...
I'm a member !
Looks like a great starting point. Not too many unmolested 71/72 Demons around anymore. For those that don't know the BEAVER was the other name...
72DMag, Just a thought. How about a booster pump on a switch. Holley makes a Mighty Mite pump in 1.5-4 psi,4-7 psi and 7-10 psi. I have been using...
Yes some sure grips,the early ones have 2 piece side spider gears later units have 1 piece. The 2 piece the axle doesn't make it far enough into...
Thanks guys. I have been looking to put A/C in my 63 Belvedere that has a 1970 small block. I have been looking at several vendors. Right now no...
Assuming it will be fresh, then what these guys said.
Fire wall reinforcement plate on a 65 Plymouth Belvedere.
Good winter project for a fresh 225.
I put the Edelbrock 800 AVS2 on my 472 Hemi when I switch from the crossram to the single 4 bbl intake. It was a good swap, Idle,off idle...
Stone Stock Slant ? That's not like you.
Same here.Just a thrill to line up and make a pass.
Ok, what ya got under the hood ? I see the twice pipes out back.
^^^^ This or a bracket bolted to the top 2 flange bolt holes and mount it in a vise. Next is a dial indicator.Take the indicator reading before...
Whats all that green stuff it's sitting on ? :)
YY1, For me it was finding one,doing the work,enjoying it for awhile. Then the need to look for another project takes over. I understand what you...
Been down that road many times.
Now that's good food anytime ! Best of luck.
