Search results for query: *

  1. C

    eq magnum rockers

    THANX EVERYONE I'LL UPDATE YALL LATER TODAY ! Very Grateful
  2. C

    eq magnum rockers

    It's a comp shelf cam I'm putting the stock stuff on today its soaking in gas in a pan and i'm gonna blow them off and inspect and reinstall I'll show some pics after done for everyone andTHANKS TO EVERYONE for the help I wish I could return the help but I am very grateful !
  3. C

    eq magnum rockers

    I tried to return them when he sent them because I specifically asked for steel rockers and did not want aluminum and he sent these and told me he doesn't know of any steel ones for magnums BS and he would have to charge a restock fee and I pay shipping . If I had known that I wouldn't be able...
  4. C

    eq magnum rockers

    It doesn't matter wat length the rod is the rocker design will not let everything mesh together if you get the fulcrom and tip at the 90 angle thepushrod is way out of it's range and if you correct that then the tip is off the stem.I tried the adj rod at every length I could and you can get 2...
  5. C

    eq magnum rockers

    Yeah sorry I have a &%#$$ phone. When the rocker is at half lift the two rollers should be at a parallel with the spring retainer angle and the roller should be at half the top of the stem right???? In the pic that was me holding it at that angle. The pushrod angle when that is at full lift is...
  6. C

    crankshaft gear issue

    https://photos.google.com/photo/AF1QipPRkkhffOzZOahfQ46_52TOtOBZFudXe056UX79
  7. C

    eq magnum rockers

    S Sorry I am at my job and can't answer but thanks for wanting to help I've done this before but never to a magnum and this one has been a nightmare from the start. First I started with a 2000 van motor liw mileage that someone had replaced the heads on but they did a good job it ran perfectly...
  8. C

    [FOR SALE] magnum rockers and studs

    I don't want the hassle of setting it up i'd rather have the pedestal I will never rev it high enough for this it's a torque motor /yeah this is what I got when I ordered steel rollers and he said he doesn't know of any steel rollers for a magnum BS it's goin in a 03 dak with a built nv3500...
  9. C

    [FOR SALE] magnum rockers and studs

    you would have to ask PIE i bought all of it as a set
  10. C

    [FOR SALE] magnum rockers and studs

    don't need them have a 5500 rv cam
  11. C

    [FOR SALE] magnum rockers and studs

    have all the boxes I put the oem rockers on it and didn't use these
  12. C

    eq magnum rockers

  13. C

    [FOR SALE] magnum rockers and studs

    I have liberty performance rockers alum roller and comp studs and guides all new 200 + ship
  14. C

    eq magnum rockers

    I have a 00 5.9 that I put a set of eq heads and a new cam, tim chain, studs, guides,rol rok, and while trying to set my rocker geometry I see no way to get the roller on the valve stem and the rocker at the proper angle. when the rocker is at the correct angle of the 2 pins there are no threads...
  15. C

    in Need of an oil filter adapter for a magnum engine

    I have an external filter relocator and I took it off an 86 360 and put it on my 00 magnum and the difference was that the plate had several more holes for the oil flow than the la had but that is the only difference cause i bolted the la adaptor on my magnum using the magnum platewith the la...
  16. C

    Difference between 95 5.9 and 02 5.9

    my 2000 ram 3500 van used the old style square pad truck mounts but the block was drilled and I put it in my 03 dakota
  17. C

    Melling Oil Pump

    i'll get it ready for your next motor the oem pump was working great when I pulled my magnum out but if you believe it's worthy for be it from me to neglect you from the melling experience I'll have it done in the morning send me a shipping label and i'll packer up lmao
  18. C

    crankshaft gear issue

    I checked after your post had spotlight and mag couldn't find anything.
  19. C

    crankshaft gear issue

    had to use my puller for old gear off and I/ can slide it on with no resistance and after it is in place it has bore slop and keyway slop
  20. C

    crankshaft gear issue

    Sorry I tried to answer to many at a time but yes sir I had to use my puller to get it off.
  21. C

    Melling Oil Pump

    sorry for the late reply but no there are no marks on the opp side thats what i thought but there is a ridge on the other side and no marks. i/ also gave the background I had for it in another post in this thread and all the other parts on that motor were fine. but who knows i/ just thought it...
  22. C

    Melling Oil Pump

    no I bought the engine fully assembled from a classic car storage place . the roof had leaked in the building after a hurricane and they had the hood off so they took out the motor and left it in the building. it was a la 360 030 over with an air gap a 7qt moroso pan rollers worked heads an a...
  23. C

    shim the rocker studs????

    my magnum eq heads have comp studs and guides and when the rocker is in the correct geometry to measure for my pushrods I don't have many threads on the stud to use should I shim the studs has anyone had this issue????
  24. C

    crankshaft gear issue

    yes I'm figuring either way I'm screwed and yes it has slack enough both ways. thanks for the reply
  25. C

    crankshaft gear issue

    it has slop in the gear bore and slop in the turning of the keyway and I know no matter how tight I get the balancer at some point that will be a harmonics issue. Thanks for the reply
  26. C

    crankshaft gear issue

    thats what I wanted to hear or rather I didn't want to hear lol I guess i'll have to get a rollmaster cause I got these parts from performance inj equipment when I bought the heads and won't deal with him anymore over a parts issue. It seems that now out of the whole top end I got from him the...
  27. C

    magnum intake

    Oh I figured it out just fine morons cast these manifolds cause the magnum stat would have worked on the la but not the other way around and when I bought the crosswind manifold back yrs ago they advertised it fit la or mag just forgot to mention that is if you don't care about ac on your magnum...
  28. C

    crankshaft gear issue

    and the key isn't worn .
  29. C

    crankshaft gear issue

    I was assembling my magnum and putting a comp 2103 timing chain kit on and the crank gear slides right on and I checked and it has slack on the keyway and slack on the bore of it has anyone had this prob ??? what should I do here?? I know the balancer is going to tighten it down but it seams to...
Back
Top