Search results for query: *

All marker lights SOLD!!!

Yes they do.

The two red ones and two of the front orange ones along with the three lock nuts have sold on Mopar A-body Projects on Facebook, only two front orange ones left. Bob

I have four orange fronts and two red rear flat side marker light assemblies along with three of the locking nuts that were extras from my 68 Barracuda. All are in good driver condition, $15.00 each plus shipping. Look at the pictures these are the lights that you will receive. Prefer PayPal no...

I bought a new set of cat whiskers from Re-Pops for my 68 Barracuda fastback, for the most part they went on all right except for the rear outer 1/4 windows. To begin with one of the clips was broken when I opened them up, no problem Re-Pops sent me some replacement clips and it was not that bad...

Does anyone have any interest in this CD, it covers Valiant, Fury and Sport Fury, Signet and Barracuda, Belvedere and Satellite. I bought this when I was building my 66 Barracuda, came in very handy. Still in great shape, MOPAR Authentic Restoration CD Dave Graham Auto Literature INC. I had it...

SOLD !!! Thanks FABO

Pending!!! and yes according to the AMD web site the fronts are for the 1970-76 Duster, and the 1971-76 Scamp.

I have two new front wheel lip moldings L/R and two used rear wheel lip moldings L/R. The new fronts are for the 1970-76 Duster, and the 1971-76 Scamp, the used rears are for the Duster, Demon, and the Dart Sport . The rears ones have some dings that you can see in the pictures, good enough for...

After I installed all my glass and new weather strips in my 68 mine were very stiff also, I wiped down all of the channels with lemon pledge. I know it sounds weird but I sprayed the lemon pledge on a clean rag and inserted the rag into the glass channels and I wiped them down a few times. No...

Everyone has their own way of doing things, that's what makes this hobby so great. Everyone has their own car and they can do whatever and however they want with it, but I am a firm believer of do it once and do it right and I sure don't want to have it yanked out again because of a problem. I...

I'm very happy for you guys who don't use sealer, you saved $12.00. This same sealant was used on my 66 Barracuda and 14 years later still no leaks and I don't expect the new owner of the car to ever have any leaks either. It's a small fee for insurance and a good time to install it when you are...

In answer to what sealant Eric uses it called C.R. Laurence 777BL available on Amazon or eBay.

For those of you who are still wondering about the windshield and back window molding clips, I have finally installed both my front and back windows and the clips for the moldings were spot on from DMT no problems at all. I did buy some off of eBay first but after comparing them with the ones I...

It was like a midsummer day here in Michigan yesterday, in the 70's so I took advantage of the warmth called my buddy Eric who is a glass install guy and we put in the new windshield and the back glass. The back glass was still the factory original oem glass that I took out along with the...

Thanks guys, it was such a clean cut that I never noticed or felt it there. Now I just need to splice a new end on it along with a grommet and I will be good to go. Thanks again Bob

I am going to have to look at my rear harness a little better, I did not see it in there. I hope I just overlooked it, may have been cut off and I missed it. Thanks for the pictures

Does anyone have or can post a picture of what the factory 1968 Barracuda rear bumper license lite jumper wire looks like. The FSM shows that it runs from the drivers side tail lite over to the license lite, but does not show the wire itself. My tail lite has two bare connectors on the wires, I...

That is correct, the bezel, the lenses, and the glove box panel that's all. Remember this was done in 2020 so the price may have changed.

I had it done in 2020 and at that time the total price was $565.00 for everything.

Thanks, the owner at that time gave me a tour of his shop when I dropped it off. There were hundreds of bezels all over the place from all makes and models, some already done, some in the process, and lots still waiting to be worked on. What a cool place to see

No that is the original dash bezel that I had restored by Vacuum-Orna Metal in Romulus Michigan before and after pics. same bezel

Here is the one that I am building right now, it to is a 68 fastback formula S 340 car. This car had not seen the sun since 1984, it had some rust behind the rear wheel wells, and just about everything under the hood along with the trans and drive shaft was missing. There were no seats and what...

I received my tach back today from Mr.heaterbox and being 70* here in Michigan it was a perfect day to re-install it back in the dash. It works like a charm, they had it for about 5 weeks and they do very nice work. Thanks to Steve (4spdragtop) for the tip on Mr.heaterbox I am very happy. By the...

Do you still have the original one from your car? if so there are places that specialize in up-dating them with the modern technology. I sent my factory rallye tach out 4 weeks ago (it did not work anyway) to be updated and it is on it's way back right now. I sent it to Mr.heaterbox in Canada...

I also bought a set of front and rear clips from Jim at DMT, his looked a lot more like the oem's that I removed from my 68. If I remember right there were instructions with the front because like you said the 7 green ones ( more square ) only go on the very bottom, dead center and then 3...

Wow I am surprised that you were able to get anything out of her, when I called them she was just a cranky old lady who told me that the sale was private and she would not give out any information about it. I must have caught her on that special day of the month. If anyone happens to see...

They are 3/4" long

I have my dash rolled back right now so I could change my front speaker and also access the factory tach to send it in to be updated with the modern technology. My windshield is currently out so it is a lot easier for me to work on. Here are a few pictures of the bolts (there are 5 of them) and...

So based on the number of members here in Michigan who have responded (0) I think it would be safe to say that either no one went or even knew about this car. Just for ***** and giggles let's say you went to this estate sale and checked this car out and found it to be "the real deal" and...