Search results for query: *

  1. D

    Small block 318/360 Magnum Swap - Motor mount answers for those with questions

    When I put 318 from -89 van to my -66 Dart, on the pass side I used slightly modified vans mount. Just drilling two holes for early-A´s original insulator and that´s it. Just thinking, was there need for two washers....
  2. D

    64 Barracuda Engine Swap ?

    I put -89 318 to my -66 using stock -66 bracket and insulator on drivers side. On pass side bracket from -66 didn't fit. After few minutes thinking I used bracket witch came with engine from an van, only drilling new holes for -66 insulator and using two washers between bracket and mounting ears...
  3. D

    65 barracuda

    You´re not from earth, it´s awesome car! 101% respect :prayer:
  4. D

    Front sway bar in -66

    You have to ask from Dave himself, what´s the price today.
  5. D

    Front sway bar in -66

    Finally... That sway bar is early ADDCO and those black brackets are from Hellvig. Fits great :thumblef:
  6. D

    318 EFI to -66 Dart

    Checked vin from that donor van and actually that engine is -89 TBI, not -90, so it need only 11,5-13,5 psi pressure and then that Holley blue would be ok by 14 psi max with regulator?
  7. D

    318 EFI to -66 Dart

    Yep, blue Holley with reg would be the solution. Something else? Ok, due big alternator, ammeter will be deleted...
  8. D

    66 Dart Owners thread

    Thanks, tmm. A couple of years ago i was just surfing in the internet and found these great sites. I´ve got already some special parts from here, thx to Hellwig :D ...pictures are still coming... That car looks better than it is and it will not be built like gasser. That pic was only for...
  9. D

    66 Dart Owners thread

    My -66 driven on 1.1 2012 what´s going on???
  10. D

    318 EFI to -66 Dart

    Tranny is -79 TF904 non lock up. If I´m right, only cruise won´t work (don´t even need it). Will there be any other troubles?
  11. D

    V8 center link question

    Have heard somewhere, that in late -66 models with l6 could be with v8-link... Not impossible, but never seen...
  12. D

    question about 66 dart

    http://www.seriousviewers.com/D-Dart/ddart.htm
  13. D

    Are these original MoParts or not?

    http://kuvablogi.com/nayta/3160630/ and next three I have one complete set and one set w/o bars. Those are for 7,25 rear only... Old stock from company, which imported Mopars to Finland in 60´s and 70´s. One story is, that those were for early Valiants and Barracudas raced and rallyed in...
  14. D

    65 barracuda

    Es kommt immer besser und besser :rolleyes:
  15. D

    Early A Body Sway Bars

    Yep Dave, I know that. I´ve old style Addco sway (ends like early C-body) and mounts to K-member are awful... It would be a little easier to start with those. How much would those brackets + hardware + shipping be?
  16. D

    65 barracuda

    Ich habe keine Wörter... :prayer:
  17. D

    Early A Body Sway Bars

    Dave, is it possible to buy those front K frame mounts separately?
  18. D

    318 EFI to -66 Dart

    I have 318EFI and complete wiring harness from -90 Van and I´m going to put them in my -66 Dart. Engine swap is easy :grin: ( have v8 centerlink, exhaust manifolds, engine mounts and oil pan already) but electrical... Is it possible (easily) to separate compu and what else is needed and put...
  19. D

    About intake...

    Would that Offy work with that engine?
  20. D

    9,25" Rearaxle

    Ok, Michael
  21. D

    About intake...

    Behind those magnums 2,5" with x-pipe and Dynomax-mufflers.
  22. D

    About intake...

    -74 400 Magnum, gets following parts: cam from 440 Magnum, stock pistons, aluheads from 440 Source and exhaust manifolds from 440 Magnum. Car is full-steel -66 Dart 2d with TF727, stall about 2500rpm, 3,21:1 rear and 295/50R15 tires. Maybe 275/60R15... I have 2 choices about intake; Edelbrock...
  23. D

    9,25" Rearaxle

    In MoparAction -94 was article, making 9,25 as cheap alternative to Dana60. New perches, housing ends for 8,75/Dana and custom axles from Moser. I have same project as procress... I have copy some where...
  24. D

    225 6 to 273 8 swap

    And you´ll need center link from original 64-66 v8 a-body.
  25. D

    SSBC kit, what spindles?

    Lower ball joint is same for 9 and 10" drums 63-72. If I´m right, all 10" spindles 63-72 are useable.
  26. D

    SSBC kit, what spindles?

    Sure you can use those small ball uca´s, 72 and older spindles ARE for small bj... 73 and up I´m not sure
  27. D

    9,25 + 8,75 axle shafts

    Ok, it wasn´t easy deal... :pale: So, if I want 9,25 to my Dart, I need axle ends from 8,75 and custom axles from Moser or cut + re-spline some C-bodyaxles... Thanks anyway, DionR
  28. D

    9,25 + 8,75 axle shafts

    I´ve told, that years ago in some magazine (Mopar Action or Mopar Muscle) was article, where an 9,25 was modified to use 8,75 axle shafts. Does anyone have that copy?
  29. D

    Q from tubular UCAs

    Here is one pic http://kuvablogi.com/nayta/2492814/?r=1 Ball joint bases are flat against table...
Back
Top