Search results for query: *

Happy birthday young fella. Don't celebrate too much. Bobby

I'm almost positive Dart/Scamp rear bumpers have a different profile than DEMON/Duster bumpers. Check the part numbers on yours to see exactly what yours fit. To me yours look like the Dart/Scamp version. Bobby

I installed one on my 1969 Barracuda and can't see anything out of it. I used the measurements from the driver side. I was told after the fact that you have to pivot the mirror in in order to see out of it. Had I known before hand that you had to install it crooked would I have done it, I don't...

Found

OK Where would I go to do that?

yes thanks

We found a working a-body 3 speed motor from national moparts in Ontario, it's on the way. Thanks to everyone. Bobby

We found a working a-body 3 speed motor, it's on the way from national moparts in Ontario. Thanks to everyone for their help and suggestions. Bobby

I thought that in 1970 the three gauges on the left were separated and round as well as the one on the right. Bobby

CFD244 I will get my service manual and check. CRUZE 418 is that an aftermarket air cleaner

OK thanks. 4spdragtop has one that he is checking for me tomorrow. He is much closer and canadian dollars so I'll wait to hear from him. I will let you know if Steve's doesn't work out. Bobby

I believe 3431739 fits 1973 models.

I had a 270 model with the letters. I don't think you could have the letters and the stripe at the same time.

Hi Looking for a working 3 speed wiper motor with wire harness to plug into the bulkhead connector. This is for a 1973-1976 a-body, not sure if the earlier 1967-1972 a-bodies are the same. If someone has one you don't have to worry about cross border shipping as I have a mail box in Calais...

I spoke with a couple of local mopar guys this afternoon and it looks like we need an a-body wiper motor unless we want to modify the harness. Sorry I was saying junction block but I should have said bulkhead connector. I also left out an important piece of information, the car has a 6 barrel...

Steve I looked at M&H and Evans. Evans is probably our best bet if we can't find a parts car with everything still in it. Thanks for your help. Bobby

Thanks townsend. That makes sense. I think he got the 3 speed motor from a fellow that has a Cordoba. Not sure what the switch comes from. It works now at one speed with a jumper wire but we want to hook it up correctly and have all speeds working. Thanks for that info.

I checked year one and they only show 2 speed motors and harness. Aaron We do have the service manual and making a harness will be a last resort. Steve I am not familiar with M&H or Evans but will check them out. Thank you both for the help.

I think we need an adapter to join the two plugs but I'm not sure. That harness from year one looks like the same harness that came on the car with a 2 speed motor. Never thought to go look at year one, I'll go check . Thanks Aaron

OK. Here are the pictures. The first one is the original harness which was plugged directly into the 2 speed wiper motor and the other end is plugged into the junction box. The second picture is the harness from the 3 speed wiper motor which is too short to plug into the junction box and also...

I think the linkage was on the motor when he got it and it hooked up to his transmission fine. I'll go to his house and get some pictures. Thanks .

We are working on a 1973 Duster which had a 2 speed wiper motor. My brother changed his wiper motor and switch to a 3 speed set up. The 3 speed motor has 4 wires coming from the motor about 10 inches long to a 4 pin plug, two flat pins above and two directly below those. Is there another...

Thank you

Dana67Dart would you know if your base also fits the vacuum gauge? They look almost identical to the tach. Thanks Bobby

Year One shows them as well but no clips. A few dollars more than PG Classics though. Bobby

I have had my 69 for 23 years now and I still learn something all the time. Could be it was available only on 68-69. Bobby

The lever to slide the seat back and forth should be on the outer track. Bobby

I thought about painting the wheels silver instead of black but I figured it would be too much silver especially with the hub caps. As for the tire sizes I was using a site called Tacoma Tire.com it does the same thing as the one you put a link to.

Thanks for kind words Steve. I was looking for a fastback and then this one popped up. The cragars have BFG t/a on them. The black wheels have Cooper Cobra on them Bobby

No trouble at all. The cragars have 205/70-14 on the front and 225/70-14 on the rear. The black wheels have 215/65-15 on the front and 245/60-15 on the rear. Bobby