Search results for query: *

  1. C

    Looking for unubtanium part ideas

    I stumbled upon several different fillister head screws on the Layson's website a few weeks ago- you may want to give them a call to see if they have the ones you need.
  2. C

    New Lower Steering Column Bearing Kit (in development)

    I’m adding a couple of pictures of my outer tube.
  3. C

    New Lower Steering Column Bearing Kit (in development)

    The outer diameters as I measure them are: Outer tube- 2.39" Inner tube (lower end at bearing)- 1.36" Steering column (at bearing location)- 1.00" The screw locations look okay to me. I measure the distance from the end of the Outer tube to the center of the oval screw holes as .50"; I think...
  4. C

    New Lower Steering Column Bearing Kit (in development)

    I have reviewed the measurements and everything looks good to me (although I'm using a cheapo caliper). It would be great if someone else could also check them. I love the graphics.
  5. C

    67 steering column kit?

    Thanks for posting this- it seems like a good solution. I have McGyvered something that I think will work for me but I haven't assembled everything yet. How much will you be asking for the 3D printed ones and is it just the retainer you're selling (without the bearing and other hardware)...
  6. C

    Steering column advise

    Thanks for posting the links!
  7. C

    Steering column advise

    I'd greatly appreciate it if you could post those links for a '67 column. I'm having trouble finding a lower column bearing and retainer for a '67 4-speed Barracuda. Thanks.
  8. C

    [SOLD] 90 degree oil filter adapters

    I will take the 67 one. PM coming.
  9. C

    67 steering column kit?

    I have been on the hunt for a 67-only lower column bearing kit and tried to contact Mr. Lane who is mentioned as a source in post #3. Sadly, it seems he passed away a few years ago. The phone number listed is not working so I’m guessing no one took over the business.
  10. C

    [FOR SALE] 63-66 Dash Speaker frame $10ea

    I will take the 67-up. PM coming your way. Thanks.
  11. C

    Tips for garage equipment?

    A mig welder, hearing protection and plenty of safety glasses scattered around so they aren’t inconvenient to put on when you just have that little thing to grind on the other side of the shop.
  12. C

    [Found!] WTB: Blower motor switch and harness for '67 Barracuda

    Thanks for the input. Unfortunately, I don't have a proper original switch; the one I have is the wrong style for a '67 so I'm trying to correct that. I'll make note of your comments for future needs- thanks again!
  13. C

    Layson's Fall 2023 Sale is ON!!!!

    It looks like that was last year's sale...
  14. C

    [Found!] WTB: Blower motor switch and harness for '67 Barracuda

    I'm looking for a heater/blower motor switch for a '67 Barracuda- part # 2770360. It would be great if it has the short harness with connector attached. Please PM if you have this. Thanks.
  15. C

    Rallye dash Tach retrofit?

    I just went down this road- I waited for months for Classic then canceled the order and ordered one from Herb's. I applied the '67 decal and repositioned the needle as described in post #4 above. I was very happy with the quality, timeliness and customer service from Herb's.
  16. C

    How much should i be paying for a

    I called the manufacturer about the scaling question and they pointed out that it can be adjusted- there is a hole on the back of the unit that allows you to turn a tiny Phillips screw for calibration.
  17. C

    How much should i be paying for a

    I have the same question about the scaling differences between the tachometer and the sticker. Has anyone come up with a solution for this? Thanks for any input.
  18. C

    [Found!] Radio bracket for 1967 Barracuda AM radio

    Thank you both for the responses. Bracket found.
  19. C

    [Found!] WTB- 1967 Barracuda 273 Commando dual point distributor

    Hi all, I'm looking for the correct dual point distributor for a 1967 Commando 273- part number 2642242. Either a working unit or a core may work. I'm in touch with Halifaxhops about this as well. Thanks, Steve
  20. C

    [Found!] Radio bracket for 1967 Barracuda AM radio

    Please let me know if anyone has this radio bracket available. Shipping will be to 02540. Thanks.
  21. C

    These rallye dash bezel overlays are the fricken best

    I was thinking DMT may have intended that the bottom overlay would be applied after the bezel was screwed into the dash so that the screws would be covered. I prefer letting them show like when the cars left the factory so I appreciate the tips posted above.
  22. C

    These rallye dash bezel overlays are the fricken best

    This is great information- thanks for sharing it!
  23. C

    [SOLD] ‘67 Barracuda Hood insulation

    Understood- I'll step aside and hope that someone closer to you can pick it up. I really appreciate the offer, though!
  24. C

    [SOLD] ‘67 Barracuda Hood insulation

    I will gladly take it. Thank you. Shipping would be to Falmouth, MA 02540.
  25. C

    1967 barracuda bucket seat adjust

    I’m using the middle holes for now, which I hope will work for me since I’m average height, but I can’t really test them out since my car is a shell right now. It had non-mopar seats in it when I bought it.
  26. C

    1967 barracuda bucket seat adjust

    Regarding the studs that go through the floor, a few of mine were badly rusted and I was able to press them out of the bases using my bench vice with a socket on the head side. It slightly mangled the base but it went back in shape fairly easily. Some heat added wouldn’t be a bad idea and use...
  27. C

    New rallye dash replacement gauges/tachs (some insider news from the supplier)

    Nice looking dash! I don't know what year your tach is from. So I cancelled my order with Classic and ordered a tach from AMS- they have a 2 week lead time for this item. I had already waited 4 months with Classic. AMS also had an AM radio that was on my "needed" list so that will be coming my...
  28. C

    New rallye dash replacement gauges/tachs (some insider news from the supplier)

    Thank you both- I will call AMS and see what they have to say.
  29. C

    New rallye dash replacement gauges/tachs (some insider news from the supplier)

    Thanks for this information. I’ve been waiting for a back-ordered aftermarket tachometer from Classic Industries for my ‘67 Barracuda for a few months now and they can’t provide any estimate of when they might ship it.
Back
Top