Separate names with a comma.
It matters what your car is here.
Dye has been used for years with no trouble. And you,use the coreprect dye for 134.Are you sure it has an expansion valve? Most modern systems...
1969 B-bodies 383 and 440 4 barrel with the oval filter and top. Yes they look cool.In 1970-71 they changed it and made it a round top and...
Yeah, Sure. because the set up is all the same right? And it don’t matter what gender the driver is. FI
You have one each of small/large bearing spindlesthe calipers are not 70 B& E. The hoses attach differently and the fingers that hold the pads...
We don’t know near enough to answer the original question. Does he run 13’s or 9’s in the 1/4 mile?Cal Tracs has a great customer service...
Med flat rate box is $16.10 Large flat rate box is $21.50
Yes I have a 3 60’s mopars that don’t leak a drop. If you have not gone through it all then yes they leak.Yes the more you use it the more...
This is a terrible idea folks. Leave in on or disconnect both.ymmv
I got a April 1971 built 318 demon from original owner with lefts on F&R. Stock brakes and rear end
Is this not a truck bellhousing? I don’t think an 833 is going to bolt up to this.[ATTACH]
Is the nit still tight or did it come loose?If you remove the yoke, can’t see much. Remove the pinion seal and the front bearing and you can...
You read where is said to measure outside the lios and subtract 1”, right?Yes that’s how its done, son.hard to measure the bead with a tire on...
Measure them. There is a gap between the rim and the center. Go outside lip to outside lip and subtract 1”I’d bet on 5” wide.
More likely 5” wide
Yeah, like the stock 318 that will rev to 6500 RPM. Really it will!That’s the best ever.
3rd gear is the front clutch applied and the second gear band released.So you could have a bad/broken seal ring on the stator support.If it...
There is a chrome plated spacer that sits on top of the console, then the tach goes on top of that.
Did you lubricate the threads?
Great car and find, thanks for posting.B7 didn’t come out until 1969. Likely EE1 paint code.
Well since you didn’t use any comp cams products or oil it will do great!
Is this going by the way of the 6500 RPM stock 318 2bbl?
If you are thinking about this you must be bored. Have you heard of big trouble using the stock amperage fuses? They made it off the lot and...
What rear end gear ratio and tire diameter? If the heat crossover in the intake open or plugged?I would swap on a different coil and try it....
The stock SBP rally wheels were only made in 14x5.5 wide, If you have 14x6 they are aftermarket.
I’ve got this from a 66 Dart.[ATTACH]
The only way to go, it cleans up nice and never gets dull. I don’t use any primer on the cast parts, never have. You can still see the cast...
Sweet, make the window shoppers get their own shipping quote. Love it.
Exactly, traction sucks on the BFG. Guys buy 295-50’s and brag how they can litemup at any speed. Big deal they suck for traction.coopers...
67 and 68 383’s are very different.67 383 had closed chambered heads and a small CFM AFB with the narrow bolt pattern. A bodies had a one year...
